The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - 4x4 Blazer driveshafts (https://67-72chevytrucks.com/vboard/showthread.php?t=242134)

onetonk5

05-22-2007 08:02 PM

4x4 Blazer driveshafts

Both front and rear Blazer driveshafts....cv in good shape as well as all u-joints. Factory length unsure of measurements but can get that tomorrow.
Out of 350/th350/205 Blazer.
$250 for the pair plus shipping

onetonk5

05-23-2007 01:29 PM

Re: 4x4 Blazer driveshafts

Ttt

onetonk5

05-26-2007 10:18 PM

Re: 4x4 Blazer driveshafts

No one needs a pair of drive shafts ??

onetonk5

05-31-2007 01:06 PM

Re: 4x4 Blazer driveshafts

Anyone priced getting a dshaft built??

1969k10stepside

05-31-2007 02:40 PM

Re: 4x4 Blazer driveshafts

Would you seperate? I might need a front driveshaft.But,I need to see if a stock one will work in it since I have a lift on my truck.

VinceY

05-31-2007 02:42 PM

Re: 4x4 Blazer driveshafts

I just had 2 drive shafts made for mine as I replaced the tranny and t-case in mine. I will try to find the bills to answer your question. The $250 price you are asking for is exactly what I am going to be asking for mine. I was told a fair price is $150-$200 for the front and $100 for the rear. I will try to hold off posting mine until yours are sold. Please let me know when they are.

onetonk5

05-31-2007 04:57 PM

Re: 4x4 Blazer driveshafts

Quote:

Originally Posted by 1969k10stepside (Post 2200715)

Would you seperate? I might need a front driveshaft.But,I need to see if a stock one will work in it since I have a lift on my truck.

Sure...I may want to keep the rear anyway to use with my 700 2wd tranny

How about 160 shipped....its in really good shape.

1969k10stepside

05-31-2007 11:35 PM

Re: 4x4 Blazer driveshafts

Will you get the length of it so I can see if it will work?
Thanks,
Dustin

onetonk5

06-01-2007 04:42 PM

Re: 4x4 Blazer driveshafts

Yea....I will post it as soon as I can measure it...thanks.
Mark

onetonk5

06-01-2007 08:13 PM

Re: 4x4 Blazer driveshafts

26 1/2 collapsed...29 1/2 extended to where the splines just start to show

1969k10stepside

06-02-2007 10:45 PM

Re: 4x4 Blazer driveshafts

Mark,I didn't get to the shop today to check but will tomorrow

1969k10stepside

06-04-2007 05:23 PM

Re: 4x4 Blazer driveshafts

Sorry Mark but it don't look like the front drive shaft is long enough

onetonk5

06-04-2007 07:45 PM

Re: 4x4 Blazer driveshafts

No Problem.

Still for sale!!

onetonk5

11-27-2007 05:57 PM

Re: 4x4 Blazer driveshafts

Get shafted

onetonk5

12-07-2007 06:03 PM

Re: 4x4 Blazer driveshafts

ttt

onetonk5

05-01-2008 04:19 AM

Re: 4x4 Blazer driveshafts

anyone need dshafts?

Old Chevy Mech

05-01-2008 09:40 PM

Re: 4x4 Blazer driveshafts

How Tight/worn is the spline? Mine is pretty loose. Almost as loose as the CV joint! LOL

Frank

onetonk5

05-06-2008 05:34 AM

Re: 4x4 Blazer driveshafts

will have to check when I get back in town....remember them being fine.

All times are GMT -4. The time now is 07:21 AM.