The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Need advice on painting frame! (https://67-72chevytrucks.com/vboard/showthread.php?t=245252)

sameyrasmea72 06-13-2007 01:41 PM
Need advice on painting frame!
 
I listed this here because I knew it would get a better response than in the paint section. I am getting ready to paint my frame and the guy at the paint store doesn't know "come here from sick em".

I am looking for the best/ most correct color for GM semi-gloss of semi-flat(what ever you call it) black. I guess for simplicity I will paint the frame, core support, inner fenders, ect. all the same color.

Does anybody have any suggestion on the type of paint as well as any codes or numbers for the correct GM black. Thanks in Advance ..........Jason

kbs71 06-13-2007 01:49 PM
Re: Need advice on painting frame!
 
Check Eastwood. their chassis black should be either the duplicate of GM or close enough.
http://www.eastwoodco.com/jump.jsp?i...10&iSubCat=415

cdowns 06-13-2007 02:16 PM
Re: Need advice on painting frame!
 
just about any auto paint supply store carries chassis black it's about as close as you'll get and most chain autoparts store carry it in spray cans either way you wont need to pay shipping and can buy local

EAST SIDE LOW LIFE 06-13-2007 03:20 PM
Re: Need advice on painting frame!
 
4 Attachment(s)
Here is the real deal. This is what GM uses for frames under hood, inner fenders etc. When I was restoring Corvettes this is the only paint that I used period! This was available through Gm Dealers or Corvette suppliers such as Zip Products, Ecklers, Corvette America or pretty much any supplier of Corvette parts. Do not let them talk you into a black paint that has the consistency of under coating. Settle for nothing less then this paint with this label.

esll. :)

Ram-Man 06-13-2007 05:30 PM
Re: Need advice on painting frame!
 
1 Attachment(s)
I used martin senour chassis black. I think it is a glossier than the original but it turned out good. You could use any satin black automotive paint and it would look great.

Mt Man Chad 06-13-2007 05:50 PM
Re: Need advice on painting frame!
 
Eastwood Chassis Black, Looks Great like original and goes on easy!

JJorgensen52 06-13-2007 06:18 PM
Re: Need advice on painting frame!
 
2 pictures and a word
Powdercoat
http://img.photobucket.com/albums/v2...7/IMG_0573.jpg
http://img.photobucket.com/albums/v2...7/IMG_0631.jpg

you can do a lower gloss than I did, but it is 50x more durable than paint is and it's a lot easier to clean
Little more work to do, but worth it in the end

RACINJASON22 06-14-2007 01:15 AM
Re: Need advice on painting frame!
 
Quote:
Originally Posted by EAST SIDE LOW LIFE (Post 2220398)
Here is the real deal. This is what GM uses for frames under hood, inner fenders etc. When I was restoring Corvettes this is the only paint that I used period! This was available through Gm Dealers or Corvette suppliers such as Zip Products, Ecklers, Corvette America or pretty much any supplier of Corvette parts. Do not let them talk you into a black paint that has the consistency of under coating. Settle for nothing less then this paint with this label.

esll. :)
I think EAST SIDE LOW LIFE hit the nail on the head here. That is probably the best there is.:metal:

You can get alot that is close but this stuff is it.

RJ22...:)

sameyrasmea72 06-14-2007 08:04 AM
Re: Need advice on painting frame!
 
Thanks for all the comments. I Like the idea of the GM stuff too. I'll Look around and see if i can find it locally.


All times are GMT -4. The time now is 01:07 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com