FS Package #3 (grab bag)
 

The lift blocks are 2". The C-shaped arm was off my '71 4x4 at stock height.
The straight arm, proportioning valve, alternator bracket, and shift knob, I don't have a clue what's it from :crazy: .
The long green/yellow harness should be a long bed tail light harness. It has a splice near the middle but the end connectors are good.
The bright green and pink harness I have no clue either but was in a box with truck parts.
The 32-new style lug nuts are....new style. They don't fit our old trucks. :hm: but if you have a newer 8-lug chevy then you're in luck.
You also get a good straight to half moon connector for our steering columns (you need this if you just purchased a van tilt).
Plus the other stuff pictured. Towel not included ;)

Now I'm really glad for flat rate boxes. This weighs 25# sealed and ready to ship postal priority to any US destination covered by the flat rate box. $14 to your door. Reply here for dibs. Paypal ok: (ezapa007@yahoo.com)

"Edit: SOLD to jay_shy"

Re: FS Package #3 (grab bag)
 

If the lift blocks are useable I will take it.

Jason

Re: FS Package #3 (grab bag)
 

Jason, what would be a reason why lift blocks won't be usable? They didn't
appear damaged when I packaged them. Also, they looked like they have a slight pitch to them. I don't remember how I acquired these because I remember going from stock height to a 4" lift with 4" blocks in the rear but my 4x4 has been sold.

Re: FS Package #3 (grab bag)
 

In the first picture I looked at the shadow made the one on the bottom look bent. Sorry for the confusion. I will get pay-pay sent to you.

Jason