The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   need drive shaft help!! (https://67-72chevytrucks.com/vboard/showthread.php?t=255046)

1970bowtie 08-22-2007 02:55 PM
need drive shaft help!!
 
i need some help, apparently the drive shaft i got with my truck is to short.
so if possible can someone measure theirs, i got a short bed with a 350/350 2wd
thanks

onefastasschevy 08-22-2007 03:20 PM
Re: need drive shaft help!!
 
I run a one piece from a 68 gremlin in mine

cdowns 08-22-2007 03:37 PM
Re: need drive shaft help!!
 
get tape measure crawl under truck measure thats the way you'll get a correct measurement

Longhorn Man 08-22-2007 04:09 PM
Re: need drive shaft help!!
 
4 ft 11 inches was what mine used.. you failed to mention if it was a long shaft or short shaft.

1970bowtie 08-22-2007 06:29 PM
Re: need drive shaft help!!
 
i dont know if its a long or short, i think i have the wrong one, because the u- joints mate up to the rearend as they should

Painter D 08-22-2007 06:36 PM
Re: need drive shaft help!!
 
better call or go to the local driveshaft shop and ask them what they measure from or you might have to do it twice. i speak from experience .2 driveshafts cost me 400$.


All times are GMT -4. The time now is 12:05 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com