![]() |
Rebuilding Front Suspension
I am inthe process of doing front suspension. Two years ago I converted my truck to power steering and power brakes.(68 C-10).My question is, do I get tie rod sleeve adjusters for power steering or manual?
Thanks, Dave |
Re: Rebuilding Front Suspension
Someone else can back me up, but I believe that you would use the power steering tie rod sleeve adjusters.
|
Re: Rebuilding Front Suspension
The adjusting sleeves were not changed when I added power steering. The sleeves are still for manual steering. Would or could this make any difference on steering?
|
Re: Rebuilding Front Suspension
ttt
|
Re: Rebuilding Front Suspension
I converted my 68 GMC to p.s. and p.b. some years back. I think the front ends should be the same on both and, if that's the case, I'm not sure why you would need to change anything from what you already have.
Mine has been working well for over 8 years and when I replace my tie rod ends, that's all I'm going to change on mine. |
Re: Rebuilding Front Suspension
Thanks a lot, the reason I asked is when I was looking online for some parts they were showing adjuster sleeves for power and manual.The prices for the power steering were a little high I thought.
Dave |
All times are GMT -4. The time now is 08:20 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com