The 1947 - Present Chevrolet & GMC Truck Message Board Network - Swapping my '69 to front disc, what do I attach the flex line to?

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Swapping my '69 to front disc, what do I attach the flex line to? (https://67-72chevytrucks.com/vboard/showthread.php?t=259264)

OLDIRON69

09-20-2007 09:57 PM

Swapping my '69 to front disc, what do I attach the flex line to?

My '69 dosen't have the little bracket on the crossmember to attach my front disc flex line that runs to the calipers. What do you guys suggest I do to resolve the issue? The '71 I pulled the hard parts off of is gone. Can I use the one for the drum and move it or am I screwed?? I have the ability to move it and weld it if it will work..any ideas would be great!

Bus Ted Knuckle

09-20-2007 10:51 PM

Re: Swapping my '69 to front disc, what do I attach the flex line to?

I cut the brackets off the back-side of the x member and then tacked them on the front.

All times are GMT -4. The time now is 11:52 AM.