The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   FS: 3 speed w/Dana 20 (https://67-72chevytrucks.com/vboard/showthread.php?t=267449)

wugunguy 11-21-2007 11:28 PM

FS: 3 speed w/Dana 20
 
Came with my blazer, was told it ran but really doubt it.

$50, can be picked up around Omaha, NE or in Northeast Kansas

http://i27.photobucket.com/albums/c1.../11-500811.jpg
http://i27.photobucket.com/albums/c1...y/11-50082.jpg
http://i27.photobucket.com/albums/c1...y/11-50083.jpg
http://i27.photobucket.com/albums/c1...y/11-50084.jpg
http://i27.photobucket.com/albums/c1...y/11-50085.jpg
http://i27.photobucket.com/albums/c1...y/11-50086.jpg

69TowRig 11-22-2007 12:18 PM

Re: FS: 3 speed w/Dana 20
 
If you are willing to part out the t-case shifter box, I am looking for one that is not worn out. The detent plate above the bottom cover on mine is rusted out badly and the shafts inside mine are in bad shape as well.

wugunguy 11-22-2007 01:23 PM

Re: FS: 3 speed w/Dana 20
 
69towrig, do you have a picture of exactly what you need so I can compare?

69TowRig 11-22-2007 05:03 PM

Re: FS: 3 speed w/Dana 20
 
I'll buy the whole shifter box off of it. The bottom end of the shifter (inside the box) is completely worn out on mine as well. Basically everything that bolts onto the side of the transmission housing, less the links that go to the T-case is what I am looking for. I had a thread about the detent plate a while back, no one had responded to it. I will dig up the pictures from that for the plate, but I basically need another good box since about 4 or 5 major parts are worn out on mine.


All times are GMT -4. The time now is 07:29 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com