The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Under Coating (https://67-72chevytrucks.com/vboard/showthread.php?t=269678)

willis0107 12-10-2007 09:36 PM

Under Coating
 
Who ever the idiot was who decide that undercoating a vehicle was good is not on my good side right now. After finally getting the nuts and bolts off the frame and getting all the grease off I am now having to remove all the undercoating off the frame. A royal pain in the ass if you ask me.

brianthelion02 12-10-2007 09:43 PM

Re: Under Coating
 
A p.i.t.a. for sure,but that may be why you have a good frame left to work with!!!!!!!!;)

72BlckButy 12-10-2007 09:56 PM

Re: Under Coating
 
I don't have to worry about anymore rust coming, because the bottom of my truck looks worse than the inside of an oil tanker...

willis0107 12-10-2007 10:09 PM

Re: Under Coating
 
for a california truck it was a waste of money to undercoat it. Heck I don't even undercoat vehicles in the midwest where they believe in SALT on the roads during the winter

Cannon007 12-11-2007 04:30 AM

Re: Under Coating
 
As soon as suspension gets taken care of, undercoating is going on THICK! I dont care if its hard to take off, atleast the nuts and bolts wont be fuzed together from rust.

cdowns 12-11-2007 06:19 AM

Re: Under Coating
 
Quote:

Originally Posted by Cannon007 (Post 2481214)
As soon as suspension gets taken care of, undercoating is going on THICK! I dont care if its hard to take off, atleast the nuts and bolts wont be fuzed together from rust.


using stainless fasteners solves that problem

willis0107 12-11-2007 08:13 AM

Re: Under Coating
 
all the undercoating does is hold in moisture. everyplace that there was a chip in it there is rust formations.

68gmsee 12-11-2007 11:45 AM

Re: Under Coating
 
I agree with willis0107, in temperate climates where they don't use salt on the roads it's really not necessary. I like to see what condition the metal is at all times and a poorly installed undercoating will hide a lot of the rust if the metal wasn't prepared properly.

I have a thin layer on my 68 gmc under the fenders that I'm going to remove and recoat them with a good coat of POR 15 or similar.

c10addict 12-11-2007 12:28 PM

Re: Under Coating
 
living in Pa and always building cars I see a TON of under coating!!!! What I found that works great is get a spray bottle or bug sprayer and fill it with kerosene.. Spray some on in the morning then afternoon then evening.. DONT touch it.. Let it soak!! Repeat this process for 2 to 3 days then hit it with a scraper.. It will fall right off.... This is a really clean method... Alot of guys approach it woth a burnzomatic torch but man it stinks,makes a mess and when that stuff starts to melt off it always finds your skin.... :whine:


All times are GMT -4. The time now is 03:16 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com