The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - stepside guys (https://67-72chevytrucks.com/vboard/showthread.php?t=270820)

kohler

12-20-2007 01:35 PM

stepside guys

my question is ,on the floor supports on the next to last there are two oval holes for mounting ,,,,,wich one do i use ???
thanks chris

kyull67

12-20-2007 03:46 PM

Re: stepside guys

Could you clarify that? I'm not really sure what you're talking about.

kohler

12-20-2007 05:02 PM

Re: stepside guys

there are two oval holes in the frame about 16-18" in from the rear,hope this helps

72BLUZ

12-20-2007 06:24 PM

Re: stepside guys

post a picture!! that would really help

kohler

12-21-2007 03:30 PM

Re: stepside guys

1 Attachment(s)

Attachment 323009here you go i hope

kyull67

12-21-2007 05:56 PM

Re: stepside guys

I'm not close to my truck right now or else I would be glad to help. But I think it may actually be the hole right behind those. I could be wrong so anyway here's at least a ttt for you. Someone will know the answer.

kyull67

12-21-2007 06:03 PM

Re: stepside guys

1 Attachment(s)

I found an old picture of my truck. Looks like it's the forward hole.

MAR-Ktech

12-22-2007 08:01 AM

Re: stepside guys

Stepside uses the forward hole, fleetside uses the rear hole.

Mar-Ktech

Correction, fleetside with steel floor uses the rear hole. The front hole is for wood floor, the rear hole for steel floor.

kohler

12-22-2007 10:48 AM

Re: stepside guys

thanks guys

All times are GMT -4. The time now is 01:00 PM.