![]() |
brake line t
How do you run a brake line t for a new set master cyclinder? Would like to upgrade to a dual master cyclinder, but no nothing of the line split "T" so I can hook up the front and rear Hope this makes sense?
thx |
Re: brake line t
Check out this post, it should answer your questions.
http://67-72chevytrucks.com/vboard/s...d.php?t=239100 Good luck, Pete |
Re: brake line t
I believe if you follow the line down from the existime mc, you will come to a t that connects the L front, R front and rear. You want to get a plug for the rear line T fitting, so you isolate the front. Connect to the new MC using the old line. You now run a new line front the existing rear line you removed, and plumb it up to the other circuit of the MC.
|
Re: brake line t
Yeap that link above was from my truck.
Just plug that tee, and run a seperate line to the rear line using a union. Need some pics ?? |
Re: brake line t
Quote:
|
Re: brake line t
yes pics would be great, oh I suppose auto zone sells brake line, I'll have to have them flared or???
|
All times are GMT -4. The time now is 07:48 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com