The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Help with Fleetside box disassembly (https://67-72chevytrucks.com/vboard/showthread.php?t=288758)

eastcoastcivil 04-23-2008 02:13 AM
Help with Fleetside box disassembly
 
Wondering if there is any cutting involved in disassembling a 67-72 fleetside box?

Sammy 04-23-2008 02:21 AM
Re: Help with Fleetside box disassembly
 
Don't know about fleets but step sides has some spot welds at least one I had did.

Eddie H. 04-23-2008 02:29 AM
Re: Help with Fleetside box disassembly
 
The fleetsides with a steel floor ( I don't know about the wood floor models) have a couple of welds in the back that need to be cut out.
A cut off wheel in a die grinder works pretty well for that. Other than that, it's just bolted together.

Madmandav 04-23-2008 02:36 AM
Re: Help with Fleetside box disassembly
 
:agree:Just a weld at the bottom of each tailgate post.

John Fabris 04-23-2008 02:56 AM
Re: Help with Fleetside box disassembly
 
two welds per side for rear panel where it meets the rear stake pocket towers.(4 welds total) Cutoff wheel or can use the sawsall....

rick0312 04-23-2008 04:49 AM
Re: Help with Fleetside box disassembly
 
some good info from Mar K.

http://www.mar-k.com/67-72conv.pdf

eastcoastcivil 04-23-2008 01:08 PM
Re: Help with Fleetside box disassembly
 
All the info you guys have provided is awesome......Thanks a bunch.


All times are GMT -4. The time now is 10:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com