help with 67 c10 a arms
 

Had stock height but truck leaned to drivers side, had front coils cut and now that the truck is in peices the drivers side is half inch lower than passenger side but its all the way down the truck. The upper a arm on the drivers side is almost perfectly parallel to the ground while pass side is at almost stock angle. Any help!!

Re: help with 67 c10 a arms
 

buy new drop coils and trash your cut ones

Re: help with 67 c10 a arms
 

Springs are 40 years old. Buy some new lowered springs and be done with it.

Re: help with 67 c10 a arms
 

springs were replaced about 6 yrs ago buy the guy i bought it from they are brand new! I thought maybe i had other problems.