FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

Parting out a 67 GMC Custom 1/2 ton, with buddy bucket bench, factory tach and positraction rear. Edit-Everything has been sold off of this one, body and frame is most likely honda/toyota parts by now.
I am up I-5 north twice a month with several stops between Portland, OR. & Marysville, WA. and I am also usually down I-5 south in the Grants Pass/Medford, OR. areas at least once a month and could assist with the buddy seat or any other large stuff. :chevy:

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

How much for the tach???....Thanks Ksjh1316...I didn't see that

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

I'm interested in the choke knob and cable and the headlight wiring harness if you part it

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

Its all posted on his link BTW nice truck wish she would have come in 6 mo ago when I was needing a ton of GMC parts

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

I will take the motor stands please pm me!!!

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

I'll check this stuff out and let you know in the am...

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

They are original sb towers that have been modified (thats why this cheap) to clear the bbc exhaust manifolds, previous owner was a fabricator of twenty plus years and did a nice job on them for his bbc conversion. Lmk if you are still interested and I can get you some pics.

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

interested in the fan shroud..... condition???

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

Will you pull the wing vent assemblies?What I real need are the two glass pieces and the complete latch assembly.Is it SoftRay tint?
I`m also interested in the fender badges and how is the tailgate?Grille?Bumper brackets?Door panels?Seat belts,red original?Window winders and door handles original?

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

One more thing, I'd like the horn button if it's the chrome GMC one with the clear plastic insert. Pic, price, condition?

Thanks

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

how much for the grill and filler panel and rad support?

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

put me 2nd in line if it has a chrome horn button and any fender emblems if they are good.

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

Is the ram assist power steering complete? If so I'm interested...

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

2 nd in line for the left vent window assy. thanks

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

Might be interested in the grill if it is any good

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

the deluxe choke knob and mount is there only as a hole filler, no cable attached anymore $10., headlight harness is complete and in good shape with no dead end wires or missing plugs - it does have a few butt connector splices but all looks to be where it should be $30., gmc deluxe horn button is in decent shape and better than alot I have seen - some very light checking but still looks pretty nice $40., I will ship all of the above usps priority for $12., so your total would be $92.

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

Here are pics of the sb towers that have been converted for use with bbc and manifolds, I will usps priority ship them to you for the $45. asking price.

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

bbc shroud is in good overall condition, it is priced at $45. because it does need some repair on the top but no pieces are missing. This would be an easy epoxy fix and its priced right if you are willing to repair.

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

the pass. side door was swapped at some point so only has the drv. side 67 type but it is kinda crusty, has been repaired at wing hinge point with a srcew and has clear glass in wing - not worth shipping, custom fender badges are in ok shape but do have some pitting, they are definitely restorable - $40. shipped, tailgate is correct small panel but is in rough shape - would'nt be worth shipping, grille is rough and pushed in several spots and rusting - would'nt be worth shipping, front bumper brackets are good and straight - $30. shipped all four, door panels are redone/custom black vinyl with matching padded glove door?, belts are long gone and window cranks/door handles are the later more commonly found 68 & up type (I think you have a pallet of these).

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

posted while I wrote thanks

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

See above, grille is rough shape and filler panel has rust thru on lower edge, rad support is gone.

2nd behind CPNE on the deluxe horn button - Sold
2nd behind special-k on the fender emblems
grille is rough - not worth shipping

left wing is rough and probably not worth pulling/shipping

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

Still interested...

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

Sold! Let me know how to make payment, paypal or mo. You can PM me the details. Thanks

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

No not complete, as in you would need a pump and pump mounting brackets, take a look at the pics and let me know if and what parts you would need/want, are you planning on having this stuff shipped?

Re: FS or Parting - 67 GMC Custom/Tach/Buddy Seat - Pac. Northwest
 

Yes, I would need it shipped, that might put it out of my price range. Any play in the gearbox? I would need that too since mine is shot. Shipping quote to 85224?