The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - bed floor width (https://67-72chevytrucks.com/vboard/showthread.php?t=307748)

FormerMember

09-22-2008 02:42 PM

bed floor width

So, I have the length I need, how wide is a steel bed floor?

I am cutting my own.

lowriden58

09-22-2008 02:47 PM

Re: bed floor width

6ft i believe. thats what i cut my 2x3 box tubing to and it fit perfect :smoke:

PanelDeland

09-22-2008 02:47 PM

Re: bed floor width

I don't know,I do however know you will need to tell whether it's a step or fleet.

FormerMember

09-22-2008 02:48 PM

Re: bed floor width

Quote:

Originally Posted by PanelDeland (Post 2900441)

I don't know,I do however know you will need to tell whether it's a step or fleet.

Fleet

CPNE	09-22-2008 03:10 PM

Re: bed floor width

How close a tolerance are you looking for? If you just need a ballpark (within 1/8 inch or so), and if you have the end bed panel, the floor should be the same width as the bottom (flange) end.

The end panel may be just a tad shorter than the floor width, but not much IIRC.

FormerMember

09-22-2008 03:59 PM

Re: bed floor width

Quote:

Originally Posted by CPNE (Post 2900462)

Thanks. I got the dimensions from Mar-K. Just ordered all the steel floor supports to make my Longhorn bed a steel one...

Malibumick

09-22-2008 09:42 PM

Re: bed floor width

funny, i just took all these measurements tonight. guess i'm a minute late.

All times are GMT -4. The time now is 07:47 PM.