The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   what is the best way to repair the front header panel of a cab? (https://67-72chevytrucks.com/vboard/showthread.php?t=311279)

mbc9ieII 10-20-2008 10:42 AM

what is the best way to repair the front header panel of a cab?
 
the cab I have has rust on both sides above the wind sheild behind the sunvisors. We have limited experience in welding in that kind of area. is it easier to cut out the small spots that are bad and replace with fresh metal. or is it easier to cut out the whole front header panel and relace it with the one that LMC offers for $100 bucks? i really dont want to use bondo... but will if i have to. does any one have pics of theirs being repaired? i dont want to make it worse then it is.....

Dingfodgy 10-20-2008 01:16 PM

Re: what is the best way to repair the front header panel of a cab?
 
In my honest opinion if you have significant rust and rot-through in this area of your cab- you will be money and time ahead to just either swap the entire cab or cut the roof @ the a-pillar and across the back and replace with a rust-free roof section from a parts truck.

mbc9ieII 10-20-2008 04:57 PM

Re: what is the best way to repair the front header panel of a cab?
 
the rust is only behind the visors. and its only pin holes in some places but it has half inch in width holes in some places. But there is still good metal there..

special-K 10-20-2008 07:01 PM

Re: what is the best way to repair the front header panel of a cab?
 
I`d go for the whole panel replacement.Replacing pieces will take more skill.Alot of labor.And,this way you know you got all the rust.

Mike J 10-20-2008 07:31 PM

Re: what is the best way to repair the front header panel of a cab?
 
Brothers has it for $99 bucks as well...

72BlckButy 10-20-2008 07:44 PM

Re: what is the best way to repair the front header panel of a cab?
 
:agree:

mbc9ieII 10-21-2008 11:14 AM

Re: what is the best way to repair the front header panel of a cab?
 
does anyone have and pics of some one replacing the front header?

msgross 10-21-2008 11:19 AM

Re: what is the best way to repair the front header panel of a cab?
 
you don't have to use the entire patch panel either. You could trim it for what you need...

I have a few pinholes there as well but not sure how to handle it yet..

72BlckButy 10-21-2008 02:08 PM

Re: what is the best way to repair the front header panel of a cab?
 
I'm in the same boat as you guys.... I'll have to deal with this in the next year or so.

1LoC10 10-21-2008 04:57 PM

Re: what is the best way to repair the front header panel of a cab?
 
$74 at GMC Pauls
http://www.gmcpauls.com/pictures/inn...patchpanel.jpg

Mike J 10-21-2008 06:53 PM

Re: what is the best way to repair the front header panel of a cab?
 
Quote:

Originally Posted by 1LoC10 (Post 2939813)

cool, it just keeps getting cheaper lol


All times are GMT -4. The time now is 08:28 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com