The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Engine conversion questions (https://67-72chevytrucks.com/vboard/showthread.php?t=318963)

Chevy4Life86

12-12-2008 08:04 PM

Engine conversion questions

i have a 1970 Chevy C-10 1/2 ton 2wd with a 350 and automatic trans. I am planning to pull the 350 out and put a 396 Big Block in it. What all will I need to do to make the conversion work well so the truck is relaible. I know i need a Big Block radiator, Turbo 400 tranny but after that im clueless if I need anything else. any suggestions would be appreciated. PS: im only doing the big block conversion because the 350 needs a total overhaul and the 396 is ready to go.

Longhorn Man

12-12-2008 08:35 PM

Re: Engine conversion questions

you looking to just shove it in there, or you looking to do it like it came with it there?

Chevy4Life86

12-12-2008 08:42 PM

Re: Engine conversion questions

to shove it in as cheap as possible without having to replace stuff in afew months.

Tx Firefighter

12-12-2008 08:43 PM

Re: Engine conversion questions

Engine mounts, fan shroud, pulleys, brackets, and exhaust.

All times are GMT -4. The time now is 08:21 PM.