The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - 1/2 ton stainless hubcaps (https://67-72chevytrucks.com/vboard/showthread.php?t=329709)

Down south truckin

02-20-2009 01:46 AM

1/2 ton stainless hubcaps

1 Attachment(s)

This is a pretty good set of caps they are not perfect but are better than average in my opinion 2 are nice 1 is good and 1 has 3 dings all of them need paint. $60 plus shipping paypal or postal money order.thanks Mike

Down south truckin

03-04-2009 10:16 PM

Re: 1/2 ton stainless hubcaps

I will consider trades as well Thanks Mike

lolife99

03-05-2009 08:30 AM

Re: 1/2 ton stainless hubcaps

What are you needing for a trade?
Also shipping cost to 65251.

Down south truckin

03-05-2009 10:29 PM

Re: 1/2 ton stainless hubcaps

I really don't need anything specifically
I'm always buying 3/4 ton caps 4x4 + t/c shifters,67-72 4x4 bumper brackets, 4x4 shifter linkage ,4x4 clutch linkage, 2wd lowering parts,tc shifter boot rings,??? got any drag racing parts??
Shipping would be around $12 ups

Thanks Mike

Quote:

Originally Posted by lolife99 (Post 3181021)

What are you needing for a trade?
Also shipping cost to 65251.

Down south truckin

03-17-2009 09:12 PM

Re: 1/2 ton stainless hubcaps

ttt

ckexswb

03-17-2009 11:19 PM

Re: 1/2 ton stainless hubcaps

Looking for inner rear bumper brackets, leaf spring 4x. Hope its allright to butt in.

Longhorn321

03-17-2009 11:40 PM

Re: 1/2 ton stainless hubcaps

What is the difference between those and 3/4 ton caps? Just curious so if I see some 1/2 tons I don't buy them by mistake. Thanks,

Down south truckin

03-18-2009 12:12 AM

Re: 1/2 ton stainless hubcaps

Quote:

Originally Posted by Longhorn321 (Post 3203917)

What is the difference between those and 3/4 ton caps? Just curious so if I see some 1/2 tons I don't buy them by mistake. Thanks,

The 1/2 ton ones are 10.5 inches across and the 3/4 ton ones are 12 inches across.

the center is shaped a little different It's hard to describe but when you look at them side by side you will see it. the 3/4 ton ones have a sunk in ring around the center. I'll see if I have some pictures that show it. thanks Mike

Down south truckin

03-18-2009 12:13 AM

Re: 1/2 ton stainless hubcaps

Quote:

Originally Posted by ckexswb (Post 3203867)

Looking for inner rear bumper brackets, leaf spring 4x. Hope its allright to butt in.

I would trade on some if you have some and want these hubcaps.thanks Mike

Down south truckin

03-18-2009 12:17 AM

Re: 1/2 ton stainless hubcaps

2 Attachment(s)

Quote:

Originally Posted by Down south truckin (Post 3203978)

Here is a shot of the center on a 3/4 ton cap you can compare it to the ones above

Down south truckin

03-18-2009 12:20 AM

Re: 1/2 ton stainless hubcaps

1 Attachment(s)

Also the edges appear to be thicker and more square on the 1/2 tons than the 3/4 ton edges which appear to be angled and thinner

Longhorn321

03-18-2009 09:28 AM

Re: 1/2 ton stainless hubcaps

Cool. Thanks,

sighlurr

08-21-2009 11:22 PM

Re: 1/2 ton stainless hubcaps

Can you check the ride to 95630 for me?

Kiamichi Kid

07-29-2010 10:09 AM

Re: 1/2 ton stainless hubcaps

Do you still have these?

Longhorn321

07-29-2010 10:48 AM

Re: 1/2 ton stainless hubcaps

Quote:

Originally Posted by Kiamichi Kid (Post 4112828)

Do you still have these?

The last post was almost a year ago so I wouldn't hold my breath.;)

Kiamichi Kid

07-29-2010 11:03 AM

Re: 1/2 ton stainless hubcaps

:-) I agree wishful thinking :-)

Down south truckin

08-03-2010 10:45 PM

Re: 1/2 ton stainless hubcaps

I may actually still have these,give me a day or two and I'll get back to you. thanks Mike

Kiamichi Kid

08-04-2010 10:04 AM

Re: 1/2 ton stainless hubcaps

Ok, Thanks

All times are GMT -4. The time now is 08:24 AM.