![]() |
68 4 wheel drive frame
I have located a 68 4 wheel drive frame, rolling chassie axles and transmission transfer case and driveshafts for 500.00 dollars. is it worth it. I seem to think it is and have been looking for a while, would like to have other opinons though. Thanks
|
Re: 68 4 wheel drive frame
sounds good to me especially if its a SWB. I have seen 1 or 2 lwb 4x4 go quickly around here for 400 - 450, dont run across the 4x4 much around here though.
|
Re: 68 4 wheel drive frame
either way, SWB or LWB, i'd go for it. it's what i'm looking for to convert my truck to 4x4.
|
Re: 68 4 wheel drive frame
Quote:
|
Re: 68 4 wheel drive frame
I personally wouldn't pay that much, I would look for a newer frame with the NP205 transfer case and disc brakes on the front axle. The rockwell t-case and drum braked front axles are good for scrap and that's about it.
|
Re: 68 4 wheel drive frame
My 69 had a 205, and disk brake open knuckle dana under it . Why would you want a frame of off a newer vehicle that wont fit the cab or bed without alot of fabricating ( or are you talking about a 69 - 72 frame?)?
|
Re: 68 4 wheel drive frame
Does it come with a title? CG had one that was missing some parts for much less but had a clear title. Too far away for you however, but he could not sell it for $200!!! There are some really cheap prices out there right now.
|
Re: 68 4 wheel drive frame
I just paid $700 for the same set up but a 1971. Sm465 trans and NP205 trans case Disk brake front end and supper solid frame.
That's in New England where anything rust free is hard to find. Go for it! |
Re: 68 4 wheel drive frame
Wish there was an inexpensive way to ship these parts east...you guys need a break. You would all cry if you saw what some people throw away on a weekly basis.
|
Re: 68 4 wheel drive frame
Quote:
Walk in a so-cal junk yard, and you'll REALLY start to cry. |
Re: 68 4 wheel drive frame
Not for $500...
drum brake axle and usually no provisions on the frame for power steering. Rear springs and longer an hard to find for a lift... I would look for a 71-72 myself... or give the guy $300 The transfer case isn't scrap but not cheap to rebuild either... |
Re: 68 4 wheel drive frame
Thanks for the imput, i have decideded to wait and try to find a 71 or 72 frame.
|
Re: 68 4 wheel drive frame
another board membe in NY just paid $450 for a 68 short bed frame with axles and steering box. It was in very good shape though...and a shorty
|
All times are GMT -4. The time now is 06:37 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com