1980 c30 with duals
 

ok so i picked this truck up to use for a hauler. but its got a case of the shakes looks like i got a mix of ford dual wheels and bent chevy wheels. so i was just going to pick up a stock steel set for it but the dealer said they dont have them anymore and the guy at the tire shop said he cant get them. so where do i get them?

Re: 1980 c30 with duals
 

Try LMC or Vintage wheels. I am sure there are more places I just can't think right now.

Re: 1980 c30 with duals
 

youre talking dually (budd) wheels? try a junkyard, i believe the bolt pattern on duallys are the same up until recent years, 8 on 6.5 i think

Re: 1980 c30 with duals
 

dodge and chevy has had the same bolt pattern for as long as i can remember

Re: 1980 c30 with duals
 

the bolt pattrn is the same but the center hole size is differant but I cant remember witch is witch. new wheels can be bought through sixrobblees and their not cheep I'd step up and buy a set of chrome or alcoa's

http://sixrobblees.com/?TB=1

Re: 1980 c30 with duals
 

i got a set for my 84 off ebay and thay were off a 2006 chevy and i got the caps and rings for less then 400

http://i13.photobucket.com/albums/a2...y/PICT0234.jpg
http://i13.photobucket.com/albums/a2...y/PICT0236.jpg
http://i13.photobucket.com/albums/a2...y/PICT0145.jpg

Re: 1980 c30 with duals
 

I have a set up here but no plans to head South.

Re: 1980 c30 with duals
 

thanks guys i know the ford wheel have a 5 inch center and i found the early chevy is 4.56 inch and the 2000 ups are 4.60 on the center the dealer can still get the 2000 up wheels and i dont think the .04 diff is going to hurt anything do you

Re: 1980 c30 with duals
 

Check craigslist. I bought a complete set with tires for 150.00

Re: 1980 c30 with duals
 

Have you made sure the pressures (and tire sizes) are equal on the insides and outsides rims? Could save you a purchase...also the usual balance and debris stuff.