The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - Power steering setup (Houston, Tx) (https://67-72chevytrucks.com/vboard/showthread.php?t=345069)

C10Sim

05-22-2009 05:06 PM

Power steering setup (Houston, Tx)

2 Attachment(s)

$170 shipped

Worked fine before I took off truck

Includes the gear box and pump

Couldnt take pic's of gear box because I already had in box.

C10Sim

05-23-2009 10:11 AM

Re: Power steering setup (Houston, Tx)

Any Offers?

C10Sim

05-24-2009 03:44 PM

Re: Power steering setup (Houston, Tx)

ttt

Devil Pup

05-25-2009 12:02 AM

Re: Power steering setup (Houston, Tx)

is this a complete power steering set up?

ljackson

05-25-2009 08:12 AM

Re: Power steering setup (Houston, Tx)

What did it come off of? Does it leak? I have a 230 iL6.
Eugene

C10Sim

05-25-2009 09:53 AM

Re: Power steering setup (Houston, Tx)

Quote:

Originally Posted by Devil Pup (Post 3325641)

is this a complete power steering set up?

Well you might need a bracket to install to your engine but they are the main components.

Quote:

Originally Posted by ljackson (Post 3325906)

What did it come off of? Does it leak? I have a 230 iL6.
Eugene

It came off a 1968 C10 I dont recall the the gear box leaking and the pump has oil but dont really know where it came from. I cant really give you a clear answer beacuse I purchased the truck and drove it 4 times then I took it apart. So I never gave it maintainence.

Devil Pup

05-25-2009 03:08 PM

Re: Power steering setup (Houston, Tx)

for a 350?

C10Sim

05-26-2009 12:01 AM

Re: Power steering setup (Houston, Tx)

Quote:

Originally Posted by Devil Pup (Post 3326537)

for a 350?

Well it came off of a 454 big block, but I think you change the pulley

C10Sim

05-26-2009 08:45 PM

Re: Power steering setup (Houston, Tx)

ttt

C10Sim

05-29-2009 01:03 PM

Re: Power steering setup (Houston, Tx)

Reduced $159 shipped

C10Sim

06-01-2009 12:56 PM

Re: Power steering setup (Houston, Tx)

ttt

goat72

06-01-2009 11:54 PM

Re: Power steering setup (Houston, Tx)

I have a 72' Custom Deluxe with NO power steering? It came factory with a 307 motor. Do you if what you have will work with what I have? Do you have the brackets and pulleys?

Thanks,
CARL

C10Sim

06-02-2009 12:01 AM

Re: Power steering setup (Houston, Tx)

Quote:

Originally Posted by goat72 (Post 3338699)

I have a 72' Custom Deluxe with NO power steering? It came factory with a 307 motor. Do you if what you have will work with what I have? Do you have the brackets and pulleys?

Thanks,
CARL

Im no expert in this subject but here are some details:
What ever bracket was on there will go with it and it was on a 454 BB engine with a long water pump.

Hope this enough details...

All times are GMT -4. The time now is 07:24 AM.