Wanna lift? Let's swap your stock leaf springs for my Skyjacker 2.5" kit.
 

My '72 K5 Blazer came with a 2.5" Skyjacker lift kit. I want to drop it down to stock height. It's my understanding that springs from a C20 4x4 will fit without modifications.

Attachment 465166

Will consider purchasing used springs, but would rather trade with someone who is looking at installing a mild lift on their vehicle. I'm looking for front and rear springs.

If you're interested, let me know. We'll work out the shipping details depending on what's involved.

Thanks!

Re: Wanna lift? Let's swap your stock leaf springs for my Skyjacker 2.5" kit.
 

i ll trade you i would like a little lift for my rig let me know .:gmc2:

Re: Wanna lift? Let's swap your stock leaf springs for my Skyjacker 2.5" kit.
 

I too am interested? LMK looks like the first poster and I are both in AZ but FEDEX isn't too bad??

Re: Wanna lift? Let's swap your stock leaf springs for my Skyjacker 2.5" kit.
 

Howdy, joemacho. Tell me more. How old are your springs. Are you sure they are stock? From the picture, it looks like your rig isn't much lower than mine. I know we are only talking about 2.5" lift (with my Skyjacker). I just want to make sure.

PM me, so I will be notified next time I log in.

Thx! Looking forward to hearing from you.

Re: Wanna lift? Let's swap your stock leaf springs for my Skyjacker 2.5" kit.
 

Not to highjack the thread but just a quick 2 questions for joemacho.

Is you Jimmy stock height? and what sides tire do you have on it?

Re: Wanna lift? Let's swap your stock leaf springs for my Skyjacker 2.5" kit.
 

they are stock springs had them since 2003 the rig was lifted at one point but i have never wheeled the rig its been park since 2003 had some motor issues. The tires i have on the rig are 32x11.50x15

Re: Wanna lift? Let's swap your stock leaf springs for my Skyjacker 2.5" kit.
 

here is a pic with my blazer with rally s on them size of tires or 235x75x15

Re: Wanna lift? Let's swap your stock leaf springs for my Skyjacker 2.5" kit.
 

OK, I'm a little confused (not for the first time...). You say the springs are stock today, but the rig was lifted at some point in the past.

That would mean you lowered the lifted rig back to stock height by putting the stock springs in place -- yes? What else was involved in that process?

Re: Wanna lift? Let's swap your stock leaf springs for my Skyjacker 2.5" kit.
 

If I only had a nickel for every time the word "rig" was used is this post...good luck with the trade.

Re: Wanna lift? Let's swap your stock leaf springs for my Skyjacker 2.5" kit.
 

whats wrong with me calling my jimmy a rig.. rig rig rig rig just joking but i will take some pics of the springs on my jimmy.:metal:

Re: Wanna lift? Let's swap your stock leaf springs for my Skyjacker 2.5" kit.
 

Dude! I was bugging you for almost two years about this and never heard anything back? PMing you now.