WTB - Th400 Inspection cover
 

I need an inspection cover for a TH400 transmission, including bolts/hardware. I think a TH350 cover will work too. Let me know price plus shipping cost to 03580

Thanks.

Re: WTB - Th400 Inspection cover
 

Jeff,
I have several at the shop, I will dig them out today, do a little degreasing and get you pics of the nicest one, how does $25 shipped sound?

FYI.. T400 and T350 do use a different cover..

Re: WTB - Th400 Inspection cover
 

Sold! Paypal okay?

Thanks

Jeff

Re: WTB - Th400 Inspection cover
 

Also, if you have it, I need the oil pressure fitting for the block and oil pressure line for a 72 402 BB

Re: WTB - Th400 Inspection cover
 

Jeff,
Here area couple of pics...
Yes paypal works.. sorry I am not able to help you on the oil pressure fittings or lines..
PM sent...

Re: WTB - Th400 Inspection cover
 

Thanks Mark!

Re: WTB - Th400 Inspection cover
 

Mark, if you have another TH350, I could use one. Seems like my son needed it more than me:lol: LMK on shipping and price

Re: WTB - Th400 Inspection cover
 

Not to hijack just resurecting but do you happen to have another th400 cover Mark? Did away with my th350 in favor of the 400 and didn't feel like modifying my old one to fit. Thanks in advance

Re: WTB - Th400 Inspection cover
 

Jeff, You are most welcome!!

jaros44sr ..... I will look tomorrow at the shop and see if I have one for a
T350. Do you need one for the large 168 tooth flywheel or one for a 153 tooth? (they are different, if your starter has bolt holes that are staggered its a 168 tooth)

ssean .... I do have more but I will have to count my tranny's tomorrow and see if I have an extra one.

Re: WTB - Th400 Inspection cover
 

[QUOTE=Livrat;3342075]Jeff, You are most welcome!!

jaros44sr ..... I will look tomorrow at the shop and see if I have one for a
T350. Do you need one for the large 168 tooth flywheel or one for a 153 tooth? (they are different, if your starter has bolt holes that are staggered its a 168 tooth)

Good question, I don't know the answer to, by your description I will try to figure it out

Re: WTB - Th400 Inspection cover
 

this info will help you identify yours....

Large flywheels are 14" in diameter, and have 168 teeth on the starter ring gear.

Starter noses used with large diameter flywheels have two offset bolt holes.

Small diameter flywheels are 12-3/4" in diameter, and have starter ring gears with 153 teeth.

Starters for small flywheels have two bolt holes which are paralleled to the back of the block.

Re: WTB - Th400 Inspection cover
 

Thanks for the info, didn't know all that! Will check tomorrow or if I go downstairs for a cigarette tonite

Re: WTB - Th400 Inspection cover
 

Mark, are these the staggered bolts you are referring to

http://i89.photobucket.com/albums/k2...replace824.jpg

Re: WTB - Th400 Inspection cover
 

Yes, that is the 168 tooth flywheel.. I do not have a good one left your application..

Re: WTB - Th400 Inspection cover
 

Took a look this morning, I do not have another extra T400 cover, sorry

Re: WTB - Th400 Inspection cover
 

Hey, thanks for checking.