parting a 68 chevy now
 

Going to try to start pulling parts this week on this one. Ask questions in thread. Pay pal (no extra fees charged to you for using pay pal) or money order
Grill is pretty good, one small dent see pic $80 plus shipping
radiator support is good $75 NO SHIPPING
powerglide shifter linkage $25 plus shipping
Automatic crossmember $50 shipped
V8 motor stands $31 shipped
gauge setup $35 shipped
trailing arms are good $100 for pair
see anything else you need ask and I'll price in thread, I'll be parting it out completely then scraping the rest. I'll post pics of other parts once I get them off
Thanks Randy

Re: parting a 68 chevy now
 

mooooo

Re: parting a 68 chevy now
 

choke delete emblem?

Re: parting a 68 chevy now
 

mnmnm

Re: parting a 68 chevy now
 

It has a decent bed floor and a decent tailgate for a driver

Re: parting a 68 chevy now
 

Mike, sorry no emblem, it had a choke cable I thought was sold but he didn't buy it, so its for sale. Thanks Randy

Re: parting a 68 chevy now
 

Randy,... how nice is the passenger side fender?

Re: parting a 68 chevy now
 

accelerator linkage

Re: parting a 68 chevy now
 

How's about a long one piece driveshaft off one of the vehicles you have? I will use it in a 2wd Blazer so I'll need to get it cut down but want a long enough one to start with? PM me?

Re: parting a 68 chevy now
 

Randy, can you do me a favor on the dash bezel. I am wanting to paint a dash bezel with a correct shade of silver for the edges but I don't have any spare 67-8 dash bezels to get the correct shade, can you wipe off a clean area and snap a shot for me? Thanks Trevor

Re: parting a 68 chevy now
 

what about the automatic shifter piece in picture 4 that i inquired a few weeks back?? thanks

Re: parting a 68 chevy now
 

Hi Randy, Is the hood bent, rusted through, or bowed anywhere? Thanks, Mark

Re: parting a 68 chevy now
 

I believe you are dealing with a 67 there. Well the inside looks to be 67 and the outside with the side markers look 68. Anyways, Im interested in the grill and rad. support. Pm sent.

Re: parting a 68 chevy now
 

does the radio work?

Re: parting a 68 chevy now
 

lolife99, Keith, sorry, its bad rust in lower front bottom amd front edge around headlight has bondo in it
otsenre, Ernest, no linkage just the pedal, sorry
70rs/ss, Mike, this one doesn't have one, I've got some more trucks bought but not sure when I'll be getting them
71blksuper, Trevor, I'll get a pic after work Tues
Timsrides, Tim, I'm wanting to keep all this linkage together, sorry
hotfun, Mark, I'll check it out, no bow in it, I'll look at it better
wancosc356, sorry its a 68, large ignition bezel and also vin states 68. 67 and 68 insides are basically the same with a few small exceptions. Sorry I'll ship the grill but not the rad support, too big. Also sorry I don't use Greyhound
egressin, its not factory and I'm unsure if its working condition
Thanks Randy

Re: parting a 68 chevy now
 

Oh ok. Well, how much for just the grill shipped to 87107? And how does the backside of it look? Thanks
Michael

Re: parting a 68 chevy now
 

Door panels Price and pics of backside?

Re: parting a 68 chevy now
 

Randy I got a ole timmer that is needing a manual steering box! shut me a price w shipping! 29720
He also needs a good 6cly. fuel sending unit too....... (1968 truck)
thanks bud

Re: parting a 68 chevy now
 

Are the door locks and ignition switch in good shape?I need that combo.LMK

Re: parting a 68 chevy now
 

How much for the tailgate?

Re: parting a 68 chevy now
 

Put me in line for the hood if it is in good shape if HOTFUN passes.

Re: parting a 68 chevy now
 

Is that a`68 Highlander?:lol:

Re: parting a 68 chevy now
 

Randy how good are the green plastic pieces (not sure what they are called) behind the window/door cranks?

Re: parting a 68 chevy now
 

How much for the radio knobs?

Re: parting a 68 chevy now
 

how much for the panhard bar bracket on the driver side frame rail shipped to 36027?