The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What rims would you go with? (https://67-72chevytrucks.com/vboard/showthread.php?t=361720)

BADPURPLE70CHEVY 09-08-2009 05:27 PM

What rims would you go with?
 
2 Attachment(s)
I am going to swap my truck over to 5 lug all the way around soon. I have brand new tires that are 265/65/15. I do not want to lower it. What rims do you guys think would look good? I would really appreciate some fellow chevy lovers opinions...............I attached a picture.........




:fb:

Tx Firefighter 09-08-2009 06:48 PM

Re: What rims would you go with?
 
I gotta say rally wheels.

vectorit 09-08-2009 06:52 PM

Re: What rims would you go with?
 
Yea X2 on the rally's, since they have classic good looks. Go with something new, and the cool factor wears off a lot of the times.

oldblue1968chevy 09-08-2009 06:56 PM

Re: What rims would you go with?
 
I like rallys and TT2 but those are too popular....show us some of your choices. What size ya going with?

OARNGESI 09-08-2009 07:04 PM

Re: What rims would you go with?
 
I like the ones you got already

mclairmo 09-08-2009 07:13 PM

Re: What rims would you go with?
 
Ralleys or Torque Thrust, Eagle 211 or similar classic 5 spoke.

HeavyD 09-08-2009 07:19 PM

Re: What rims would you go with?
 
Slots

BCOWANWHEELS 09-08-2009 08:14 PM

Re: What rims would you go with?
 
Lower it ( alot ) and go ralleys or torque thrusts. 8" front and 10 " rear

Sinister 09-08-2009 08:21 PM

Re: What rims would you go with?
 
Quote:

Originally Posted by oarngesi (Post 3508485)
i like the ones you got already

x2

mclairmo 09-08-2009 08:25 PM

Re: What rims would you go with?
 
Quote:

Originally Posted by HeavyD (Post 3508513)
Slots

I like slots, too, but you'd have to lower the truck or keep it at current height (or lift it) and run all terrain tires. I think that the decision to not lower the truck (but also run a 265/65/15) makes wheel choice much more difficult as many aftermarket wheels only look good on a lowered truck. I am going to lift my 68 C10 and run 31 inch or larger all terrain tires. I think that looks best on a longbed. However, shorbeds look best to me lowered with cool rims. What you want to do is somewhat unconventional. I personally think your truck looks great as is. I would keep the six lugs and run it. I don't see the reason to switch to 5 lugs unless you will also lower it.

BADPURPLE70CHEVY 09-08-2009 08:43 PM

Re: What rims would you go with?
 
2 Attachment(s)
:fb:The only reason i am going to 5 lug is i am dropping a 406 small block with close to 550+ horses and i need the disk brakes. Number two i already have the stuff to do it. I have attached two sets of rims i like what do you think.
I also like 15x10's. thanks fellas

oldblue1968chevy 09-08-2009 08:51 PM

Re: What rims would you go with?
 
I still vote rallys..i do not care for the above.

Palf70Step 09-08-2009 08:59 PM

Re: What rims would you go with?
 
I am for ralleys also, but you can get them in the wider widths from places like Wheel Vintiques, truck or vette ralleys.

FRENCHBLUE72 09-08-2009 09:11 PM

Re: What rims would you go with?
 
I like the auto drags myself..

redbaron69 09-08-2009 09:45 PM

Re: What rims would you go with?
 
my pick would be vette rallys. good looking truck

CSGAS 09-08-2009 10:49 PM

Re: What rims would you go with?
 
I have always (meaning these will hold their looks not just be short trendy wheels) favored TT-D's, Kidney Beans (Salt Flats through ARE), Corvette Rallyes, and smoothies (although I liked painted rims with the police or baby moon caps, not chrome rims).

Depending on how you feel about copying a period look, you could consider the Impala version of the "Camaro Z28" wheels from the late 80's, or the steel rims used on base trucks from that time...I think they look about as good as the older "musclecar" Rally's usually do on later vehicles. Same goes for Centerlines, Champ 500s, Convo Pros, Cragar S/S, modulars and the like. I tend to put slotted mags in this (period look) category also.

I don't think you're into the Lancer/"flipper" look or full-size Moons, since those would go along with whitewalls and ground-dragging height. There's lots of factory take-offs from later years that I think would look good, too--but they tend to not be 15" anymore.

leddzepp 09-08-2009 11:20 PM

Re: What rims would you go with?
 
Rallyes would look great. What you have on there now does not look bad either. Besides Rallyes, I like Torque Thrust II's or Hopsters.

71swb4x4 09-08-2009 11:29 PM

Re: What rims would you go with?
 
Polished aluminum slots.

Ackattack 09-09-2009 01:05 AM

Re: What rims would you go with?
 
what brand are those pro-star looking ones? I've been wanting a set of pro stars for my truck for drag racing, but weld doesn't make them in a 5x5 pattern.

I think you know my vote!

70cst 09-09-2009 01:22 AM

Re: What rims would you go with?
 
I agree with some of the others as I like the rallys and TT2's. I have TT2's and I may evenualyy selll them and go with Vette Rallys. By the way...the wheels on your truck look good to me.

westofb 09-09-2009 02:42 AM

Re: What rims would you go with?
 
Quote:

Originally Posted by Ackattack (Post 3509196)
what brand are those pro-star looking ones? I've been wanting a set of pro stars for my truck for drag racing, but weld doesn't make them in a 5x5 pattern.

I think you know my vote!

I think you can get them from jegs...there house brand wheel.

As far as wheel choice for the originator of the thread...I like the car syle ralleys with police hub caps....no trim rings and wheels painted to match color of the truck. Honestly it is your truck so why do you care what we think? Heck, put some wood spokes on it if that is what you like...it's yours after all!

mclairmo 09-09-2009 04:19 AM

Re: What rims would you go with?
 
You can get 6 lug disc brake rotors for the front that will likely bolt on to your spindles that you have already acquired for the conversion. Would probably be cheaper than buying new wheels and stronger.

special-K 09-09-2009 06:38 AM

Re: What rims would you go with?
 
I don`t think rallyes are what you need.I like them for a sporty stockish look and your truck doesn`t have a stock look.Rallyes look best on trucks with trim in factory colors.Your truck would look best with the wheels you showed.I,personally,like the 5-spoke style because they have a more aggressive look.They look better spinning around,too.They just look tougher.they`ll go good with the whole 550 hp theme.

72BlckButy 09-09-2009 08:28 AM

Re: What rims would you go with?
 
4 Attachment(s)
No need to swap to 5-lug... just lower it, add some 6-lug discs up front and add a set of rallys. Plain and simple.... :D

Here's a few shots of mine we did about a month and a half ago: (check out the install in my signature "Blank Slate")

Attachment 494831

Attachment 494832

Attachment 494833

Attachment 494834


All times are GMT -4. The time now is 03:55 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com