The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - need help (https://67-72chevytrucks.com/vboard/showthread.php?t=362308)

shockermotorsports1

09-12-2009 01:59 PM

need help

i need help. i have a short tail shaft th350 in my 83 so my drive shaft was to short so i got one from a 94 but i have a 12 bolt and the ujoint wont set in the yoke any help

dammitmitchell

09-12-2009 11:47 PM

Re: need help

take a caliper and measure the seats for the u-joints, worite down those measurements and go to the shop/napa/carquest/ autobone (last resort)
and tell them the measurements, and they'll tell u what u joints you need..
as simple as that

All times are GMT -4. The time now is 07:15 PM.