The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Good to know a machinist! (https://67-72chevytrucks.com/vboard/showthread.php?t=37555)

Yukon Jack

01-23-2003 01:22 PM

Good to know a machinist!

1 Attachment(s)

I have been needing to locate a coupler for the adapter I am using between a Rockwell and an SM465. The coupler I had from my three speed adapter was too long. Greg (gregs_place) had a worn coupler and gave it to me so I could have mine machined down. Luckily I know a guy who works in a machine shop and he set me right up. He cut it down then cut out the inside splines about 1/2". The finished product looks perfect!

Here's a few pics just for the heck of it.

Yukon Jack

01-23-2003 01:23 PM

1 Attachment(s)

And another

Yukon Jack

01-23-2003 01:23 PM

1 Attachment(s)

And a last pic

Crank

01-23-2003 01:43 PM

Looks awesome. Tell him thanks from the board. Now you can get back to showing some kick ass pics of you pulling stuff and whatnot with your bigass truck!
Brandon

All times are GMT -4. The time now is 03:49 PM.