The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - a arm bushings (https://67-72chevytrucks.com/vboard/showthread.php?t=380746)

novafrog

01-12-2010 09:20 AM

a arm bushings

any tor. spec., i was going to tightin all i could,give shot of lube,thanks for any help

425HP409

01-12-2010 01:37 PM

Re: a arm bushings

Could you be a little more specific as to what you are trying to accomplish or what your problem is?

kevncar

01-12-2010 01:51 PM

Re: a arm bushings

I think he's looking for torque specs on the upper and lower screw-in a-arm bushings...I have some I need to put in soon too...good question. I have the chassis service manual at home. I'll look tonight to see if it says anything.

novafrog

01-12-2010 05:50 PM

Re: a arm bushings

that is what iam doing thanks

dfwright

01-12-2010 06:47 PM

Re: a arm bushings

I don't know if it is different for the different years, but for 72, it is 95 upper, 130 lower

novafrog

01-13-2010 09:11 AM

Re: a arm bushings

Quote:

Originally Posted by dfwright (Post 3726739)

I don't know if it is different for the different years, but for 72, it is 95 upper, 130 lower

72 thats what i have,thank all of you for help

425HP409

01-13-2010 10:23 AM

Re: a arm bushings

Make sure that you pregrease the bushings and shaft if you are installing new bushings as the clearances are "Very Tight" and it is hard to grease them with a grease gun when they are new.

novafrog

01-13-2010 08:46 PM

Re: a arm bushings

Quote:

Originally Posted by 425HP409 (Post 3728081)

Make sure that you pregrease the bushings and shaft if you are installing new bushings as the clearances are "Very Tight" and it is hard to grease them with a grease gun when they are new.

thanks you all have been very helpful

All times are GMT -4. The time now is 04:16 PM.