The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - CA WTB: Bed support and Vent retainer (https://67-72chevytrucks.com/vboard/showthread.php?t=382043)

dazza

01-19-2010 07:08 PM

WTB: Bed support and Vent retainer

3 Attachment(s)

Looking for another one of these, mounts from bed to frame near the wheel. Not sure if there is a left and a right although in the second picture you can see there is a "R" (right?) I don't remember which side it came off? (1st and second pics)

Also need a retainer clip from the backside of a kick panel vent door. (3rd pic)

Thanks!

Don Brace

01-25-2010 07:09 PM

Re: WTB: Bed support and Vent retainer

I have several extras and will look and see if I have one with an L on it.
Don Brace MN

WIDESIDE72

01-25-2010 07:22 PM

Re: WTB: Bed support and Vent retainer

I was not aware of there being an "L" and "R" either. I also have a few and will check.

Don Brace

01-26-2010 02:02 PM

Re: WTB: Bed support and Vent retainer

Checked my bed supports. One has and L stamped on it and is about 16 1/2 inches long. The one with the R is about 15 inches long.
Don Brace MN

All times are GMT -4. The time now is 11:33 AM.