BBC Parts
 

Well, my big block fantasies were dashed when I found a problem with my block. Never even got it fully assembled. To keep my 68' build project on track, I scrapped my big block plans and purchased a 383 crate motor. Now all my new big block parts must go. I'm taking huge losses on all this stuff. Prices are negotiable especially if buying more than one item. ie; heads and cam.


Edelbrock Performer RPM Marine Heads
Assembled with Comp Cams valve train to support 304HR roller cam. Heads were purchased new and assembled by local speed shop. I bolted one head on the block. The other was never bolted up due to a block defect. I will throw in the correct ARP head bolts and head gaskets(a $200 value). Everything for $1800
http://i965.photobucket.com/albums/a...h_DSCF7209.jpghttp://i965.photobucket.com/albums/a...h_DSCF7210.jpghttp://i965.photobucket.com/albums/a...h_DSCF7212.jpg

New in box, Edelbrock Air Gap Intake - Nascar edition. This edition normally sells for over $300. Take it for $225
http://i965.photobucket.com/albums/a...dl-75613_w.jpg

New Comp Cams 304HR Roller Cam w/ roller lifters. Includes timing cover that has been modified with the correct cam end play and matching Comp Push Rods. All for $600
http://i965.photobucket.com/albums/a...h_DSCF7229.jpg

New black painted water pump with pulleys for a 454 $40
http://i965.photobucket.com/albums/a...h_DSCF7247.jpg

New B&M Flywheel weighted for 454 $50
http://i965.photobucket.com/albums/a...h_DSCF7216.jpg

New Comp lifters, flat tappet $25 (Had these just laying around the garage)
http://i965.photobucket.com/albums/a...h_DSCF7236.jpg

BBC oil pan with New Melling high volume oil pump. Comes with bolts $45
http://i965.photobucket.com/albums/a...h_DSCF7219.jpg[/URL]http://i965.photobucket.com/albums/a...h_DSCF7222.jpg

Re: BBC Parts
 

May be interested in the water pump and pullies...depending on if short or long pump and pullies


Eric

Re: BBC Parts
 

I definitely looks to be a short pump. :)

Re: BBC Parts
 

Do you have bb motor mounts?

Re: BBC Parts
 

No, I sure don't. I was using tubular mounts that work for sbc or bbc so I'll need them.

Re: BBC Parts
 

Actually it's a long water pump with pulleys that came off a 79' 454.

Re: BBC Parts
 

can you give me a price on flywheel pan and oil pump shipped to 70737 thanks jimmy

Re: BBC Parts
 

Boy did I call that one wrong :rolleyes:

Re: BBC Parts
 

$110 shipped
I accept Paypal joseph@houndheaven.com or credit card over the phone (3% fee)

Re: BBC Parts
 

pics wouldn't load for me. is that intake an oval port?

Re: BBC Parts
 

Yes this is an oval port intake.

Re: BBC Parts
 

i don't need it but it would be nice to have for a future project. $200 shipped?

Re: BBC Parts
 

I will do $220 shipped. That's still over $100 below the best web price and it's new in the box.

Re: BBC Parts
 

you tease. Ok i'll take it. how would you like payment?

Re: BBC Parts
 

I will take the lifters. Figure the total for me and I will send you a MO. Shipping will be to 49445.

Jim

Re: BBC Parts
 

I prefer payment via Paypal to ebay@houndheaven.com

Re: BBC Parts
 

I will do $32 shipped. I PM you my information.

Re: BBC Parts
 

So most of the small stuff has been sold. I still have the items shown below available. I'm willing to take $2300 for the Heads & Roller Cam as a package deal. That's well below cost.

Too Much Stuff: 396 pulleys and pump $40 shipped

67Mach1: Cab dolly $100 - pickup

Sharpie1972: HEI $75 shipped

JimKshortstep4x4: lifters $32 shipped

snj8198: Manifold $225 shipped

68lowburb: Oil Pan w/pump & flywheel $110 shipped

Edelbrock Performer RPM Marine Heads
Assembled with Comp Cams valve train to support 304HR roller cam. Heads were purchased new and assembled by local speed shop. I bolted one head on the block. The other was never bolted up due to a block defect. I will throw in the correct ARP head bolts and head gaskets(a $200 value). Everything for $1800
http://i965.photobucket.com/albums/a...h_DSCF7209.jpghttp://i965.photobucket.com/albums/a...h_DSCF7210.jpghttp://i965.photobucket.com/albums/a...h_DSCF7212.jpg

New Comp Cams 304HR Roller Cam w/ roller lifters. Includes timing cover that has been modified with the correct cam end play and matching Comp Push Rods. All for $600
http://i965.photobucket.com/albums/a...h_DSCF7229.jpghttp://i965.photobucket.com/albums/a...h_DSCF7232.jpghttp://i965.photobucket.com/albums/a...h_DSCF7237.jpg

New black painted water pump with pulleys for a 454 $40
http://i965.photobucket.com/albums/a...h_DSCF7247.jpg

Re: BBC Parts
 

payment sent for the intake. PM'd you shipping info. Let me know when you sent it. Thank you. -steve

Re: BBC Parts
 

PM sent.

Jim

Re: BBC Parts
 

I am looking for the short pullies so i can use a short water pump on a 454..... What do you have for power steering set up? I would be interested in that if its set up for short water pump...

Eric

Re: BBC Parts
 

As a matter of fact, I believe I have all the accessories and brackets to fit a BBC w/ short pump. Those parts along with a bunch of other stuff are in storage. I will run out today and take a few pics and get back to you.

Re: BBC Parts
 

Can you give me some specs on the heads....Or a part number to look it up. What is the chamber size? What do they flow? Do they take a stock header? They look like iron? etc....

Re: BBC Parts
 

I guess the photos didn't come up for you? The heads are aluminum with black hard anodizing for protection. They come that way because they are Marine heads. Do a search on Edelbrock Performer RPM Marine Heads for more info

Combustion chamber volume 110cc
Intake runner volume 290cc
Exhaust runner volume 110cc
Intake valve diameter 2.25"
Exhaust valve diameter 1.89"
Valve stem diameter 11/32"
Valve guides Manganese bronze
Deck thickness 9/16"
Valve spring diameter Springs Not Included
Valve spring maximum lift Springs Not Included
Rocker stud 7/16"
Guideplate Hardened steel
Pushrod diameter 3/8"
Valve angle 26°
Exhaust port location Stock
Spark plug fitment 14mm x 3/4 reach, gasket seat
Made In USA


Designed for 396-502 c.i.d. big block Chevy engines, these Edelbrock cylinder heads include heavy-duty exhaust valves that provide the added durability needed for marine applications, and have one-piece, stainless steel intake valves with hardened tips and swirl-polished heads. The high-velocity flow capabilities of Edelbrock Performer RPM cylinder heads provide increased torque across a wide rpm range that's ideal for marine use. They're cast from A356 aluminum and heat-treated to T6 specs. These Oval-port heads have 110cc chambers with hard-anodizing to protect the aluminum in the harsh marine environments.

Re: BBC Parts
 

That sounds great i am very interested on what you have for a short water pump for a 454....I always like to see what is in storage ..you never know what you have.....I would like to have first at what you drag out.....

Eric