The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Radio Delete panel Ideas (https://67-72chevytrucks.com/vboard/showthread.php?t=384099)

Hottrucks 01-30-2010 05:57 PM
Radio Delete panel Ideas
 
1 Attachment(s)
these are the guages for my air ride...zero cutting on the dash

you could use them for switches too

pmpski_1 01-30-2010 07:43 PM
Re: Radio Delete panel Ideas
 
What diameter are those gauges?

hicktownhotrodder 01-30-2010 08:31 PM
Re: Radio Delete panel Ideas
 
thats a neat panel! where'd ya get it?

Hottrucks 01-30-2010 09:25 PM
Re: Radio Delete panel Ideas
 
its a stock radio delete and the guages fit in the opening for the radio, I traced the opening from behind and drilled the holes with a hole saw ...its tight but does work..the guages are 2 1/8" I think ...standard guage size....

like I said I did't cut the dash..I want to add 2 switchs in the knob holes...but the clips are there ..although I was thinking that another light switch/knob would do both jobs..just not sure what I would use them for

Fitz 01-31-2010 11:33 PM
Re: Radio Delete panel Ideas
 
1 Attachment(s)
There is another way to do that. Cutoff wheel, Tig Torch & grinder. Much cleaner delete!

Indyuke 02-01-2010 03:01 AM
Re: Radio Delete panel Ideas
 
Quick amateur install.

http://i154.photobucket.com/albums/s...e/Wowza005.jpg


All times are GMT -4. The time now is 10:06 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com