The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Upper Control Arm Shaft (https://67-72chevytrucks.com/vboard/showthread.php?t=391332)

Andrew68c10

03-10-2010 10:46 AM

Upper Control Arm Shaft

I just replaced my upper control arm shafts and tightened the caps and mounting bolts. One side moves freely and the other is really stiff to the point where it doesn't drop down under the weight of the spindle assembly. Is this a problem?

OhOneWS6

03-10-2010 04:02 PM

Re: Upper Control Arm Shaft

Have you greased them yet?

Wrenchbender Ret

03-10-2010 04:22 PM

Re: Upper Control Arm Shaft

Is the shaft centered between the bushings? As long as it is centered & greased it will loosen up after a while.

All times are GMT -4. The time now is 08:26 AM.