The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   CA WTB/WTT - 16.5 steel wheels (https://67-72chevytrucks.com/vboard/showthread.php?t=434321)

lowrollin70gmc 12-06-2010 02:38 AM

WTB/WTT - 16.5 steel wheels
 
I currently have a set of (5) 8 lug 16.5x6 steelies (outer nubs) with 9.5LT16.5s on them.

I am looking for a set of 8 lug 16.5 x 8.25 or 16.5 x 9.75. Nub style does not matter to me, as I will not be putting hubcaps on most likely. I can even mix and match nub style!

Trade preferred, but if I need to lay out some cash to get some wider wheels I am willing to and I'm also up for a road trip to pick up wheels or pay for shipping.

Thank you for your time,
Andrew

Location: Camp Pendleton, CA 92055 (Fallbrook, CA)
Phone: 605-376-3130 (cell, please leave message)

lowrollin70gmc 12-09-2010 04:12 PM

Re: WTB/WTT - 16.5 steel wheels
 
3 day bump

lowrollin70gmc 12-19-2010 01:06 PM

Re: WTB/WTT - 16.5 steel wheels
 
El bumpo por favor senor.

67chevy1series 12-19-2010 01:58 PM

Re: WTB/WTT - 16.5 steel wheels
 
okay i will bump

lowrollin70gmc 12-25-2010 01:44 AM

Re: WTB/WTT - 16.5 steel wheels
 
merry christmas bump

longhorn70gmc 12-27-2010 04:05 PM

Re: WTB/WTT - 16.5 steel wheels
 
Quote:

Originally Posted by lowrollin70gmc (Post 4333864)
I currently have a set of (5) 8 lug 16.5x6 steelies (outer nubs) with 9.5LT16.5s on them.

I am looking for a set of 8 lug 16.5 x 8.25 or 16.5 x 9.75. Nub style does not matter to me, as I will not be putting hubcaps on most likely. I can even mix and match nub style!

Trade preferred, but if I need to lay out some cash to get some wider wheels I am willing to and I'm also up for a road trip to pick up wheels or pay for shipping.

Thank you for your time,
Andrew

Location: Camp Pendleton, CA 92055 (Fallbrook, CA)
Phone: 605-376-3130 (cell, please leave message)

Hello Andrew,
I have four 16.5 8 lug rims that came off my Longhorn. Let me check the sizes and get back to you. I live in Ridgecrest California, 3 1/2 to 4 hours from San Diego.
R/

longhorn70gmc 12-27-2010 06:03 PM

Re: WTB/WTT - 16.5 steel wheels
 
Hey Andrew,
I went home and measured the rims the best I could. I still have tires on them, so I had to adjust. Rim wise, from the side of it measures about 7 1/2 to 8.0 inches. The front of the rim measured out at 2 1/2 to 3 inches from inside to outer lip, there not deep dish, but they have some deph to them. One of the tires read out at 8.75 R16.5LT and the other three read out at 9.50 R16.5 LT. There was a consistant stamp on the front that had the number 7 on them. Let me know if there is another way to measure them. They are all four GM and are the same. They have hub cap lips on them for caps.
R/

lowrollin70gmc 12-29-2010 07:22 PM

Re: WTB/WTT - 16.5 steel wheels
 
Let me measure up the set i have to do the math from a known size when i get back to cali, sounds like yours could be 8.25s.

teeitup 12-29-2010 07:56 PM

Re: WTB/WTT - 16.5 steel wheels
 
I have 2 here in Kansas, not sure on width but they look wide

DC Truck Parts 12-31-2010 05:39 PM

Re: WTB/WTT - 16.5 steel wheels
 
I have a set from my 68 gmc there 8x16.5 and 10x16.5 with 33x 12.5 rear front are 9.50 there about 80% tread would like 350.00 for the set of 4 from washington [IMG]16.5 tires 001[/IMG]

lowrollin70gmc 01-14-2011 01:02 AM

Re: WTB/WTT - 16.5 steel wheels
 
Thanks for all the replies, I've found a set of 8.25s.

Longhorn, I'm guessing yours are 16.5 x 7s, as I have a set of 6s with 9.5r16.5s and your measurements are just about an inch bigger.

Andrew

Duncan and son 01-14-2011 10:37 AM

Re: WTB/WTT - 16.5 steel wheels
 
If you want to change directions we have a nice set (4) of 16.5 x 9.75 slotted mags that we would take $300 plus shipping.
Hope that helps Paul

longhorn70gmc 01-14-2011 05:34 PM

Re: WTB/WTT - 16.5 steel wheels
 
Thanks for gettin back. Glad you found what you were looking for. I switched over to the 16 inch rims for my two longhorns. Take care my board brother.
R/

mrk818 01-25-2011 12:00 AM

Re: WTB/WTT - 16.5 steel wheels
 
I am also looking for a set of 16.5 9.75 camper special wheels ?

FL71C10 01-25-2011 12:10 AM

Re: WTB/WTT - 16.5 steel wheels
 
Quote:

Originally Posted by mrk818 (Post 4436360)
I am also looking for a set of 16.5 9.75 camper special wheels ?

Check with renokeene, he's got a camper special he's planning to part out.
Posted via Mobile Device

mrk818 01-25-2011 12:13 AM

Re: WTB/WTT - 16.5 steel wheels
 
thanks anyone else ?

454_72_4X4 01-25-2011 12:52 AM

Re: WTB/WTT - 16.5 steel wheels
 
Quote:

Originally Posted by mrk818 (Post 4436389)
thanks anyone else ?

Anything different about the camper special wheels compared to other 16.5x 9.75 wheels?

I think I still have a couple 16.5x9.75 steel wheels layin around.

mrk818 01-25-2011 01:08 AM

Re: WTB/WTT - 16.5 steel wheels
 
pmed you


All times are GMT -4. The time now is 08:12 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com