The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Motor mounts (https://67-72chevytrucks.com/vboard/showthread.php?t=441139)

mwilliams5891 01-17-2011 06:02 AM

Motor mounts
 
Are these the right motor mounts to finish my Swap to a V8?

its a manual 2WD inline 6 now going to make it a V8 and just want to double check

thanks

cdowns 01-17-2011 06:13 AM

Re: Motor mounts
 
???? invisable mounts what'll they think of next

usmcchevy 01-17-2011 12:09 PM

Re: Motor mounts
 
These are the mounts, can be used with 6 or 8cyl towers.

http://www.autozone.com/autozone/par...3627_195313_0_

RIDDLA 01-17-2011 12:25 PM

Re: Motor mounts
 
Yes There correct

msgross 01-17-2011 12:39 PM

Re: Motor mounts
 
FYI they are junk and made in India... I suggest spending a few more dollars for the Energy poly mounts. ask me how I know...

mwilliams5891 01-17-2011 02:39 PM

Re: Motor mounts
 
ok I will look into the others ones

thank you guys for all of your help

mwilliams5891 01-17-2011 02:45 PM

Re: Motor mounts
 
Quote:

Originally Posted by msgross (Post 4417857)
FYI they are junk and made in India... I suggest spending a few more dollars for the Energy poly mounts. ask me how I know...

are these the one you were talking about?

I dont really understand what to look at to make sure they fit and are of good quality. so thanks for your help

msgross 01-17-2011 04:26 PM

Re: Motor mounts
 
I bought mine from NAPA, and one of the threads were bad from the start...might have even been metric so check them out before you install them... got another set and still had a few issues, just poor quality. I think there is only a few manufacturers of these so if they say "made in India" then they are the same as what I had.

For a little bit more the energy suspension set will be a better product. The poly never rots and the customer service is good as well. I used their spring bushings and any issues where sold right away.


All times are GMT -4. The time now is 01:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com