The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - integral power steering on a '67 C20? (https://67-72chevytrucks.com/vboard/showthread.php?t=448863)

manimal

02-24-2011 12:25 AM

integral power steering on a '67 C20?

Hey all, I just bought a 67 CST 20 2wd. It has the power assist steering and I am wondering will a power steering gear box bolt to the frame and work? Thanks.
BTW I will be using the parts from a '77 C20 2wd.

too much stuff

02-24-2011 01:03 AM

Re: integral power steering on a '67 C20?

Not a direct bolt on. I think it can be shimmed out to make work, but i have never done it.

67chevy1series

02-24-2011 01:51 AM

Re: integral power steering on a '67 C20?

the worst you would have to do is grind down the wall of the gear box and then get some washers to put inbetween the frame and gear box, member GASWAGON has done it to his 67cst and that is what his thread is called

5150.4.67

02-24-2011 01:53 AM

Re: integral power steering on a '67 C20?

It will bolt up with shims or you can heat the frame to dimple it for clearance.

67chevy1series

02-24-2011 01:55 AM

Re: integral power steering on a '67 C20?

Quote:

Originally Posted by 5150.4.67 (Post 4509475)

It will bolt up with shims or you can heat the frame to dimple it for clearance.

if you do what i saidf and he said you should definaelty be ok, hehe.

All times are GMT -4. The time now is 06:24 AM.