driveshaft clearance on 12 inch lift
 

how would i go about getting the front driveshaft to work on a 84 k10 longbed with 10-12 inch suspension lift? pictures would be great.

thanks.

Re: driveshaft clearance on 12 inch lift
 

Re: driveshaft clearance on 12 inch lift
 

look into a divorced transfercase

Re: driveshaft clearance on 12 inch lift
 

too expensive, any other possible options? thanks

Re: driveshaft clearance on 12 inch lift
 

Can you drop the transfer case down to help out at all? I know its possible to crank the front axles upwards at a better angle think that takes a lot of work though lol!

Re: driveshaft clearance on 12 inch lift
 

do a 1' body lift

Re: driveshaft clearance on 12 inch lift
 

I agree with LONGHAIR. Contact High-Angle, or Tom Woods. See what they say about what you need. They might be able to put you together a CV shaft that will get you by. Maybe a slight clock of the transfer case combined with the new shaft would be the best middle ground before getting into extreme mods.

Extreme being turning the C's on your front axle to set the pinion angle without effecting your chamber, and steering.

Re: driveshaft clearance on 12 inch lift
 

800$ starting price for a front driveline to work with that lift.