The 1947 - Present Chevrolet & GMC Truck Message Board Network - Process for Ball joints, Idler and Pitman arms

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - Process for Ball joints, Idler and Pitman arms (https://67-72chevytrucks.com/vboard/showthread.php?t=450621)

tjvending

03-03-2011 02:21 PM

Process for Ball joints, Idler and Pitman arms

What's the starting to finished process on replacing the Ball joints, Idler and Pitman Arms. Which comes first or does it matter?

PanelDeland

03-03-2011 09:35 PM

Re: Process for Ball joints, Idler and Pitman arms

I like to do BJ's first.I usually have a harder time with them and try to get them out of the way first.There was a good vid of the BJ process on here but I didn't find the link in a quick search.

tjvending

03-04-2011 08:42 AM

Re: Process for Ball joints, Idler and Pitman arms

Anyone have the link to the video on Ball Joint Removal or install?

PanelDeland

03-04-2011 10:13 AM

Re: Process for Ball joints, Idler and Pitman arms

Found it

http://www.67-72chevytrucks.com/vboa...ht=Ball+joints

BB72CHEVKT

03-04-2011 11:59 AM

Re: Process for Ball joints, Idler and Pitman arms

Quote:

Originally Posted by PanelDeland (Post 4528291)

I like to do BJ's first.I usually have a harder time with them and try to get them out of the way first.There was a good vid of the BJ process on here but I didn't find the link in a quick search.

So funny had to read it to my coworker.

tubbedII

03-04-2011 12:17 PM

Re: Process for Ball joints, Idler and Pitman arms

Quote:

Originally Posted by BB72CHEVKT (Post 4529511)

So funny had to read it to my coworker.

:lol::lol::lol: I've read it like 5 times now....still laughing.

tjvending

03-04-2011 12:26 PM

Re: Process for Ball joints, Idler and Pitman arms

Quote:

Originally Posted by tubbedII (Post 4529560)

:lol::lol::lol: I've read it like 5 times now....still laughing.

Everything has a process...

Mike J

03-04-2011 02:29 PM

Re: Process for Ball joints, Idler and Pitman arms

you guys are wrong. lol :lol:

All times are GMT -4. The time now is 11:40 AM.