The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   EGR and other vacuum line routing (https://67-72chevytrucks.com/vboard/showthread.php?t=452301)

56hotrodred 03-11-2011 01:17 PM

EGR and other vacuum line routing
 
4 Attachment(s)
I usually spend more time on the older truck forum but am also building a lifted 73 4x4 with one of my sons. It came to us partially built and with no vacuum lines hooked up as well as a lot of other things.

Specifically where does the EGR vacuum line run to, what is the little "T" on the front of the intake manifold and how do I hook in the canister - maybe it is not a "T" but hopefully you know what I mean. Also vacuum and other lines from the canister to the fuel tank would be helpful.

I have included a couple of photos for your viewing pleasure because I know we all like photos.

You will notice that I am mounting a 25 gallon 73 Blazer fuel tank in the rear of the frame so my fuel hook up will not be stock. So far I am pretty happy with the results but have to drop the tank a bit to clear the bottom of the box.

Any photos of the engine compartment showing vacuum lines and fuel tank hook up would be greatly appreciated. I have looked at several diagrams but none of them have been real helpful so far.

Thanks in advance.

56hotrodred (Barry)


All times are GMT -4. The time now is 06:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com