The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   SC Heater Parts Needed (https://67-72chevytrucks.com/vboard/showthread.php?t=453823)

TobyArnot 03-18-2011 10:03 PM

Heater Parts Needed
 
1 Attachment(s)
O.K. - I have a '70 stepper with factory deluxe (non-A/C) heater. Long story short, I need the part of the inside duct that makes the 90* turn. The PO installed an underdash A/C that requires trimming the 90* duct. Unfortunately he went over board and kinda butchered the cut and the damper inself. Does anyone have this piece of heater duct and baffle (used, preferrably), for cheap. I can salvage about any decent part. Thanks. in advance, for the help

teeitup 03-18-2011 11:20 PM

Re: Heater Parts Needed
 
Toby, I should have the non AC under dash stuff out there. I can look and get pics Sat. Thanks Randy

TobyArnot 03-19-2011 12:30 AM

Re: Heater Parts Needed
 
Super !

teeitup 03-19-2011 12:02 PM

Re: Heater Parts Needed
 
1 Attachment(s)
Toby, which piece do you need

48richard 03-19-2011 12:03 PM

Re: Heater Parts Needed
 
If Randy doesn't have what you need, I have a very nice complete set of inside boxes.

Richard

teeitup 03-19-2011 12:15 PM

Re: Heater Parts Needed
 
just seen you posted pic, that would be top left on in my pic $20 shipped
Thanks Randy

TobyArnot 03-19-2011 01:34 PM

Re: Heater Parts Needed
 
Quote:

Originally Posted by teeitup (Post 4562963)
just seen you posted pic, that would be top left on in my pic $20 shipped
Thanks Randy

That's it Randy. Does it have the damper (flap-valve)?

If so we're good!

teeitup 03-19-2011 02:02 PM

Re: Heater Parts Needed
 
yes sir its in there

TobyArnot 03-19-2011 05:28 PM

Re: Heater Parts Needed
 
Great - PM with your PAYPAL info and we'll get rolling.

Thanks,

Toby

TobyArnot 03-23-2011 04:43 PM

Re: Heater Parts Needed
 
Hey Randy,

Got the part today (Wed.) Looks great and I can definitely make it work.

Thanks for the sweet deal.


All times are GMT -4. The time now is 11:47 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com