The 1947 - Present Chevrolet & GMC Truck Message Board Network

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - t400 drive shaft (https://67-72chevytrucks.com/vboard/showthread.php?t=457678)

HDBOB

04-06-2011 12:14 AM

t400 drive shaft

I need to know if the drive shaft assy from a 69 TH400 w/ longbed would be the same as a 72 with the same.

dmack91

04-06-2011 04:26 AM

Re: t400 drive shaft

Just guessing, but as long as the rear axle is the same, it should match up.

Not sure if it would if one was an Eaton and one was a Dana though.

Hottrucks

04-06-2011 05:52 AM

Re: t400 drive shaft

I would just measure them...if the motors are in the same location and both have short/long tailshaft trans it will swap out

All times are GMT -4. The time now is 04:16 PM.