The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - 4 spd z bar bracket on 85 305 motor (https://67-72chevytrucks.com/vboard/showthread.php?t=459353)

ges55

04-15-2011 11:30 AM

4 spd z bar bracket on 85 305 motor

Putting an 85 305 V8 in place of the 250ci in my 67 3/4 ton. Having trouble with the the z bar bracket on the block of the 305. There's only one hole on the block & the small block brackets have 2 holes. Any ideas?
Thanks in advance.

ges55

04-15-2011 12:05 PM

Re: 4 spd z bar bracket on 85 305 motor

I just found out that the 85s had hydraulic clutches.

ges55

04-16-2011 02:15 PM

Re: 4 spd z bar bracket on 85 305 motor

Has anyone ever done this?
Thanks.

OJ1988

04-16-2011 02:46 PM

Re: 4 spd z bar bracket on 85 305 motor

Are you using 6 cyl motor mounts or v8?

I just went from a 250 3 on the tree to a 350 muncie 4 speed.

ges55

04-21-2011 11:10 AM

Re: 4 spd z bar bracket on 85 305 motor

We used the 6 cyl mounts.

All times are GMT -4. The time now is 07:46 PM.