long to short bed
 

thinking about cutting down my c-20 long wood bed. anyone done this(im sure)? wondering where i have to cut. in front of wheels? rear part behind wheels the same length with long and short? do i need to split and take out excess or can i take off front where header panel is? any input appreciated. thanx rich

Re: long to short bed
 

There are a few threads in the FAQ section on this...one was by Rckcrln.

Re: long to short bed
 

thank you sir, rich

Re: long to short bed
 

alot more attempts at this end up in the dumpster rather than prime examples of completed work

a huge job make no mistake you need to b excellent at measuring cutting and above all else welding

Re: long to short bed
 

Good luck Rich.

I hope you are able to make this happen.

Re: long to short bed
 

It's really not that big of a deal. I have done a couple. As long as you can weld and have the right tools you can do it. 12 inches under the cab, 8 off the very rear of the frame, move rear cab mounts forward, shorten driveshaft, brake lines wires etc.. Pretty straightforward.