Antenna help questions.. ideas
 

Hey all.. so my antenna got ripped out of its hole.. and i'm ok. with that except for the hole left from the antenna .. anything out there i can plug the hole with or any small aftermarket antennas that fit our trucks .. i searched .. i promise.. any ideas would be helpful..

thanks
nate

Re: Antenna help questions.. ideas
 

I say just go to a junkyard and find a 67-72. It's not something people pull off very often.
Posted via Mobile Device

Re: Antenna help questions.. ideas
 

i still have the antenna... its just not going back in.. i'd rather put something to cover it.. i don't know

Re: Antenna help questions.. ideas
 

go to a hardware store or plumbing supply and get the cover that goes into a 4 hole sink when you are using a faucet without spray, it is a small cover that plugs the hole where a sink spray would go through the sink, it has tabs that can been bent in and stay, you could also paint it, the technical term is: a cockhole cover. I know that sounds very nasty and I am not trying to be but that is what it is called, for real.

Re: Antenna help questions.. ideas
 

Go to a hardware store and get a metal furnuture plug. They come in sizes from 1/4 in all the way to 11/2

Re: Antenna help questions.. ideas
 

thanks guys... great info.

Re: Antenna help questions.. ideas
 

here's what i'm workin with :smoke:

Re: Antenna help questions.. ideas
 

i mean this:

Re: Antenna help questions.. ideas
 

tap plastic dot com

Re: Antenna help questions.. ideas
 

bend the edge down a bit all around...weld a piece of metal in there grind it...
shot of paint and be done.