The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Part number for replacement float??? (https://67-72chevytrucks.com/vboard/showthread.php?t=484272)

69heavychevy 09-13-2011 08:02 PM

Part number for replacement float???
 
Hi guys, I was needing the part number for a replacement plastic float for my fuel sender. Tried calling the parts stores but had no luck...I'm sure they stock them but I would be better off having a part number handy.

Palf70Step 09-13-2011 09:19 PM

Re: Part number for replacement float???
 
Far as I know all the floats for our years are brass. Not sure if they are a standard parts store item, but most venders do sell them.

Stricklinator 09-13-2011 09:23 PM

Re: Part number for replacement float???
 
Yep, my 1969 C20's float was brass, I had to replace the whole sender and the new one is brass too.
Posted via Mobile Device

69heavychevy 09-13-2011 09:36 PM

Re: Part number for replacement float???
 
I've read threads on here of people replacing the brass floats on new senders for plastic ones since they leak a lot. Just havent seen a part number listed.

69heavychevy 09-13-2011 09:40 PM

Re: Part number for replacement float???
 
I'm pretty sure the float on my OE sender is a plastic kind of material...worst case I could use that one, but I'd rather have a new one to go with my new sender.

69heavychevy 09-21-2011 11:24 PM

Re: Part number for replacement float???
 
ttt

cdowns 09-22-2011 10:39 AM

Re: Part number for replacement float???
 
from the factory was brass// i'd much rather have a brass one


All times are GMT -4. The time now is 12:02 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com