High hump change over
 

What is the best way to convert a low hump cab to a high hump so it looks facyory ??

Re: High hump change over
 

I got a high hump from a donor cab, it unbolted, then set it over the low hump and traced the outline and the bolt holes. I then made a card board template of the flange and set it inside the outline I traced on the low hump. I traced this template and cut the inside line with a cut off wheel, drilled out the bolt holes, welded some nuts to the underside and bolted the high hump on. It looks pretty good in my opinion.