Upper Control Arm Spacer
 

I need someone's help! I have a 70c10 1/2 ton front end on my build, I am trying to get ahold of the upper washer that sits between the crossmember and the upper control arm cross shaft. Its about 1/2 in thick and is flat on one side but dished in on the other. I have a 72 GMC frame but it has different spacers. I was going to try to order from LMC, but I have no idea if the part in their breakdown is the correct one. And their cust suppt is for crap if you ask me.

Re: Upper Control Arm Spacer
 

i'd check at local NAPA store or a shop that does frontend alignments

Re: Upper Control Arm Spacer
 

These aren't the alignment spacers this is a large washer that sits between the cross member and the alignment spacers.

Re: Upper Control Arm Spacer
 

See in this pic I have washers on the left side and there is the large spacer that is purple on the right, this is the part I am talking about.

Re: Upper Control Arm Spacer
 

that is still where i';d go look for them

Re: Upper Control Arm Spacer
 

I may have a couple, I'll check when I get home this afternoon. Do you just need 1?

Re: Upper Control Arm Spacer
 

Yes just one .
Posted via Mobile Device

Re: Upper Control Arm Spacer
 

I'll let you know tomorrow...no computer at home.

Re: Upper Control Arm Spacer
 

Awesome tks man

Chris

Re: Upper Control Arm Spacer
 

I've got one. PM me your address and I'll put it in the mail in the morning.
No charge, just pay it forword.
Brad
Posted via Mobile Device

Re: Upper Control Arm Spacer
 

Hey Chris, here is a pic of the spacer. Going out today. If for any reason this is different than the others let me know and I will send you the other 3 so they will all be the same. Pay it forword means free, and when it's your turn do the same for the next guy.
Good luck on your build.
Brad

(How about them Lions!)

Re: Upper Control Arm Spacer
 

Thats it, man you rock!!!! Will do boss, yeah who would have thought they are kickin some arse this year

Re: Upper Control Arm Spacer