1967 and 1968 doors
 

willing to ship!
i may take a day or 2 to do shipping quotes and to send them out. im often busy and i work most of the day and by the time im off post office is closed.

they are empty/stripped. all have speaker holes. i cant really help u with what colors they are. the blue are the 67 btw/

need more pixs? ask!
1968 doors still have trim installed though. the passenger is great but the drivers has crease/dent?
http://i1120.photobucket.com/albums/...y/SAM_0209.jpg
http://i1120.photobucket.com/albums/...y/SAM_0210.jpg
http://i1120.photobucket.com/albums/...y/SAM_0211.jpg
http://i1120.photobucket.com/albums/...y/SAM_0213.jpg
http://i1120.photobucket.com/albums/...y/SAM_0212.jpg
asking $100 passenger 68
$75 drivers 68
drivers 67= $55 it needs work!
passenger 67 = $100

Re: 1967 and 1968 doors
 

GREAT deal! I'd be over in a second for all four if I lived within a couple hours ;)

Re: 1967 and 1968 doors
 

what is the dif... between 67-68 and 69-72 doors... levers??? actuators???? and I know the door handles are diff angles but will they work on all model basically?

Re: 1967 and 1968 doors
 

Yea they all interchange. Differeence in handles is just the 67. The 72's are a better design for weather. They are also thicker or something. They require longer shaft on window regulators and door handles. The 68 and up have a Tear drop hole as apposed to the 67's circle hole i believe.

There was also a post that showed the hinges were different along the years/design change
Posted via Mobile Device

Re: 1967 and 1968 doors
 

Yeah the hinges were very subtle differences I noticed. I believe all the bolt patterns interchange though...

Re: 1967 and 1968 doors
 

yeah the hinges do interchange. Bolt pattern is same.
Posted via Mobile Device

Re: 1967 and 1968 doors
 

Yeah I wish I could get a hold of my buddy in Santa Barbara I would be set... . He tends to "disappear" from time to time but comes back home to indy quite frequent... Good luck man Nice deal to be made here folks!

Re: 1967 and 1968 doors
 

ttt

Re: 1967 and 1968 doors
 

Ttt
must go!
$250 for all?
Posted via Mobile Device

Re: 1967 and 1968 doors
 

is the crease/dent in the drivers side 68 the one shown on the inside of the door ? or is there another one on the outside? are there any more issues with the 68 doors? I'm interested in them but shipping might kill the deal. could you get a qoute for both 68 doors shipped to 29720

Re: 1967 and 1968 doors
 

Id like to see more pictures of the bottoms. Can you tell me how much to ship the two best ones. 1 left and 1 right of course to 02825 Rhode Island?

Re: 1967 and 1968 doors
 

None have rst through at the bottoms. Greyhound would probably be thw best way to get them shipped undamaged. They seem to be at a $1 a pound? I took a 110 pound package and got quoted $115 to ship. Red69ss pm me your nearest station to u.

Old chevy guy. The two best doors imo are the 68 pair. One 67 is rough, i believe drivers. I havnt posted new pxs because camera is mia and i yanked the camera out of my iphonw because it shorted.
Posted via Mobile Device

Re: 1967 and 1968 doors
 

Looking at a whole truck nearby but will have to buy the entire project to get the doors. Any idea how much a stripped out door weighs?

Re: 1967 and 1968 doors
 

Im very interested in the 68 doors theres a bus terminal in providence I tried to get a quote online but the websiteb would not cooperate. I weighed a complete door without a door panel or handles and it only weighed 55 lbs so im guessing striped out there more like 45. so if You can give me a price shipped I will most likely take them.If the math comes out like I think. let me know asap.

Re: 1967 and 1968 doors
 

Talked to Greyhound they dont ship to Providence so it would be to Newport RI

Re: 1967 and 1968 doors
 

old chevy guy

your in line. i first have to cater red69ss

Re: 1967 and 1968 doors
 

Thats cool let me know

Re: 1967 and 1968 doors
 

ever sell these doors?

Re: 1967 and 1968 doors
 

sorry guys, the are still up but im moving atm and cant get a quote til im done emptying the house and garage.

Re: 1967 and 1968 doors
 

just let me know when you have the time ,I'm not in a big hurry, but I deffinently want the doors. thanks