|
67 grill, sub spare tire, and more
Looking to sell some of my spare parts that I will not be needing. These parts are located in Binghamton, NY, but I can bring them back up to rochester with me sunday if there is interest in them. i will not be bringing them up unless someone is serious about them.
1) 1967 or 1968 chevy Truck Grill for sale. One of the best looking grills for the 67-72 trucks. This one is in great shape. There are no rust holes on this grill, and very minumal surface rust, just a little on the inside. There are also no dents on the grill itself. Included with the grill is the center support with hood latch, emblem in fair shape with some pitting, and two painted grill hoops. The hoops are in good shape, with 1 minor ding on each that might be abl to br fixed. The lower splash shield that connects to the botton of the core support is also there and solid. This is a great piece and a rare find in the Northeast in this condition. Slap a coat of paint on it and it's ready to be a nice driver quality, or fix the minor imperfections and it'll be show ready. Asking $120 for it. PENDING LOCAL http://i282.photobucket.com/albums/k...k/100_5848.jpg http://i282.photobucket.com/albums/k...1/100_9511.jpg http://i282.photobucket.com/albums/k...s/100_5723.jpg http://i282.photobucket.com/albums/k...s/100_5724.jpg http://i282.photobucket.com/albums/k...s/100_5725.jpg 2) 1967 - 1972 Chevy or GMC pickup truck upper cab/windshield patch panel. This is a partial roof cut that was temoved 4 inches down from the top of the windshield, and 6-8 inches back from the front drip rail. This is a good patch if you have rust in the upper windshield area, or on the front part of the roof, either inside or outside. There is a small amount rust through on the lower side where the door would be, but this does not affect the above mentioned areas. This is a great patch piece, and is all original metal. Asking $30 http://i282.photobucket.com/albums/k...1/100_9535.jpg http://i282.photobucket.com/albums/k...1/100_9536.jpg http://i282.photobucket.com/albums/k...1/100_9537.jpg http://i282.photobucket.com/albums/k...1/100_9538.jpg http://i282.photobucket.com/albums/k...1/100_9539.jpg 3) 1967-1972 Chevy or GMC Suburban Spare Tire Well. This is the piece where the Spare Tire sits in the back of the Suburbans. It is known to collect dirt and debris and rust out very easily. This piece was removed from a 1970 and is in great shape. it is very solid, with some minor surface rust from age. These are NOT reproduced, and are hard to come by in good shape. Asking $60 http://i282.photobucket.com/albums/k...k/101_1797.jpg http://i282.photobucket.com/albums/k...k/101_1798.jpg 4) Also have a rear drive shaft from a 1970 3/4 4x4 GMC suburban. It is very large and in great shape. It was behind a 350/TH350/NP205 combo and attached to a Eaton HO72 rear axle. Asking $30 - Probably scrapping it SCRAPED! http://i282.photobucket.com/albums/k...404001616b.jpg 5) 69-72 Blazer passenger side Flip Forward seat. Dirty, but in good shape. Stitching pulling a little on one side. Missing front swivel bracket, but have the rear hold down one for it. Very hard to find complete with good foam and back. Asking $100 http://i282.photobucket.com/albums/k...1/100_9365.jpg 6) Stepside rear tail lights. Asking $25 http://i282.photobucket.com/albums/k...1/100_0638.jpg http://i282.photobucket.com/albums/k...1/100_0639.jpg 7) 67 Suburban Glove Box door. Slight rust on it. Have the emblem, but 2 studs broke. One still in door, so it could be glued. $20 http://i282.photobucket.com/albums/k...1/100_1060.jpg 8) Radio Delete plates. Have 3. 2 have 2 clips, 1 only has one. $15 each http://i282.photobucket.com/albums/k...d/100_1433.jpg 9) Blazer Fuel Filler Cover in great shape. Some surface rust on the inside, but no holes. Hard to find in this shape. $40 SOLD!!! http://i282.photobucket.com/albums/k...d/100_1454.jpg http://i282.photobucket.com/albums/k...d/100_1455.jpg 10) Single Spicer 8 lug Locking Hub. Same as Chevy, but says ford. Not broken. Used shape, but looks to be in good physical shape. Came off a 8 lug D44 HD front axle. Might work on a D60 $20 http://i282.photobucket.com/albums/k...s/100_0962.jpg |
Re: 67 grill, sub spare tire, and more
Lowered the prices a bunch. Open to offers. Wife wants to move sooner than later, so if you can pick it up, that's better.
|
Re: 67 grill, sub spare tire, and more
PM sent....about grille
|
Re: 67 grill, sub spare tire, and more
Would you be willing to ship the roof section to RI? If so can you give me a shipped price to 02825? Thanks!
|
Re: 67 grill, sub spare tire, and more
I can check on shipping the roof section greyhound if you let me know what the closest greyhound location is to you.
|
Re: 67 grill, sub spare tire, and more
can you check on shipping for the seat to 73018, nearest greyhound would be Oklahoma City, thanks
|
Re: 67 grill, sub spare tire, and more
I will try and check that saturday when I am home as well.
|
Re: 67 grill, sub spare tire, and more
Seat shipped to 65251?
|
Re: 67 grill, sub spare tire, and more
#5 and #6 - shipping to 37379 please sir? I would be interested in a package deal if the seat makes it to me.
Thanks. |
Re: 67 grill, sub spare tire, and more
I will check shipping quote saturday and get back to people in order by monday. Would be gound greyhound, so quotes will be to the nearest one I can find unless specified.
Just as an FYI, I am in the process of moving, so these parts are at my old house 3 hours away, so I only have access to them on the weekends. Hopefully people aren't in a hurry. |
Re: 67 grill, sub spare tire, and more
Quote:
|
Re: 67 grill, sub spare tire, and more
I'll get in line on the bucket seat. I wouldn't need the mounting brackets. My zip is 37043.
|
Re: 67 grill, sub spare tire, and more
put me inline for the grille shipped to grey hound baton rouge louisiana thanks
|
| All times are GMT -4. The time now is 11:01 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com