The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   GM Shoulder Seat Belts in a Blazer (https://67-72chevytrucks.com/vboard/showthread.php?t=495275)

cpavelko 11-23-2011 12:18 AM

GM Shoulder Seat Belts in a Blazer
 
Have some aftermarket lap belts in my Blazer that suck. I was Looking for some factory GM seatbelts out of a 70's vintage car/truck that would work. I looked through the threads and couldn't find any good pictures. I have a roll bar. Could some of you post some pics of your shoulder harness seat belts in Blazers / Jimmy's. I was thinking of using thge 72-73 era exploding seatbelts (see images below). Need something to look for when junkyard hunting this weekend.
Shoulder Belt to bolt onto the roll bar:
http://i.ebayimg.com/t/Seat-Belt-Sho...gN0dw~~_12.JPG

Lap belt which can be used by itself:
http://i.ebayimg.com/t/1972-72-CHEVE...gf)nw~~_12.JPG

viking427 11-23-2011 11:46 AM

Re: GM Shoulder Seat Belts in a Blazer
 
Since you have a roll/sport bar, Any of the pickup/blazer/suburb 3 point belt systems should work. Id look for one that puts the single latch & spool (retractor) at the base of the rollbar, or in the factory position at the rear base of the seats, the roller mount up on the rollbar at shoulder height, and the female buckle inboard of the seats. Just make sure your rollbar is mounted solid and reinforced well if you plan on tying your body to it.

http://67-72chevytrucks.com/vboard/s...light=shoulder


All times are GMT -4. The time now is 06:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com