|
67 SWB Part Out!
5 Attachment(s)
SOLD! SOLD! SOLD! The truck is gone! Everything is gone except my 350 which I think I'm gonna keep just in case I need it for my or another project.
PRICE CUTS!!!! Hey guys! Parting out this poor ole rusted 67 Chevy that I've had sitting around for a few years. Tried selling it all together, but seems more interest in parts of it. So here ya go. Prices may be negotiable. If you think it's too high, get with me. Large/Heavy items would rather have local pickup. Such as cab, bed, frame, cowl panel, bumper, engine etc. If I've not listed something or priced just ask. You may see something I've missed. ;) Painted bumper (patina, torched under license plate area. can be welded up. straight other than that) $15 Original Gauge cluster with gauges $75 SWB frame (cab, bed, etc. not included) $475 Cowls (one from 67SOLD, one pictured in barn from my old 70) light surface rust on each and have antenna hole $30 a peice One left! Attachment 835906 Attachment 835907 Attachment 835908 Attachment 835909 Attachment 835910 |
Re: 67 SWB Part Out!
I'm in for the _exterior_ door handles. Price? Condition?
|
Re: 67 SWB Part Out!
5 Attachment(s)
Here's more. 350 small block. Rebuilt 2 bolt main. 1000 miles or less on it. Truck it was in (my 70 ((first truck)) was wrecked in 2002. Been sitting here in barn ever since. Numbers match up to a '70 corvette from what I remember. Turns over so far by hand then stops, but ran when pulled and had 500 mile break in oil change. NEVER bored. Wasn't that bad when rebuilt so was just honed before installing new pistons. Built stock. 4 barrel Q-jet intake and carb, Delco HEI distributor. That's all I can think of on it for now. $500 New patch panels, just been sitting in barn (covered in barn dust in pics, will clean before pickup or shipped) Cab corners LH and RH $18 a piece shipped! RH full rocker $12 SOLD LH or RH rocker patch panel $8 shipped Attachment 835917 Attachment 835918 Attachment 835919 Attachment 835920 Attachment 835921 |
Re: 67 SWB Part Out!
Quote:
|
Re: 67 SWB Part Out!
5 Attachment(s)
More pics of frame cab etc. Plan to include axle and suspension with frame. Front end is already gone just incase you're wondering.
Black seat (not 67, came from my 70) Good padding, needs reupholstered. $40 ;) Attachment 835928 Attachment 835929 Attachment 835930 Attachment 835931 Attachment 835932 |
Re: 67 SWB Part Out!
A photo would be most appreciated if possible. Thanks!
|
Re: 67 SWB Part Out!
Slickcopper: How much for choke cable/knob and wiper switch/knob and lighter assy. will meet at Wendy's. Thanks Don
|
Re: 67 SWB Part Out!
Is that manual choke or manual throttle?
If it's Manual throttle then i'll take the setup for it... let me know please. |
Re: 67 SWB Part Out!
Rear window trim and rear roof body line trim, roof drip rail trim. Inner door panels (how they look?) , rear view mirror with bracket, and the 2 cab corners to 48867.
thx, D off to work to pay for this crap....later... |
Re: 67 SWB Part Out!
Also, any seat belts?
|
Re: 67 SWB Part Out!
I will take the interior door handles the interior window cranks (if you have them) and the vent window khandles! Get me price shipped to zip 58268! I'm second in line for choke cable/knob and wiper switch/knob and lighter assy, also the rear view mirror with bracket.
Posted via Mobile Device |
Re: 67 SWB Part Out!
interested in the full rocker and rocker patch.Shipped to zip 27028
|
Re: 67 SWB Part Out!
Interested in the cluster assy. Any cab corners left? how much for the glove box door?
|
Re: 67 SWB Part Out!
Interested in the glove box door if it gets to me , do you have a closer picture of the emblem? Thanks - Bob
|
Re: 67 SWB Part Out!
Also interested in seat belts depending on color, condition and price.
|
Re: 67 SWB Part Out!
Next in line on the full rocker and cab corner it the guys ahead of me pass. thanks
|
Re: 67 SWB Part Out!
Any chance you have the door mirror arms? L and R
|
Re: 67 SWB Part Out!
On my phone. I'll get back with everyone better tonight. There were two original seat belts, but I'm planning to use for my truck. No exterior mirror arms. Truck has no trim on it. Glove box door in good shape, but emblem was also salvaged for my project. ;)
Posted via Mobile Device |
Re: 67 SWB Part Out!
hey on that glovebox door emblem.... did you notice any tabs that plug in the glovebox door? I have the emblem for my door but the nubs that go in the door are way too skinny like theres supposed to be some kind of tab or something that it slides into. Ill have to pass on the dash cluster. I cant swing a bill right now
|
Re: 67 SWB Part Out!
pass on the door , was looking for it just to get the emblem - Thanks
|
Re: 67 SWB Part Out!
Quote:
Posted via Mobile Device |
Re: 67 SWB Part Out!
3 Attachment(s)
Quote:
Choke cable is good except end/tip (part that bends over and goes into carb linkage) is broke/cut off. I guess could be bent and still used. Don't have lighter assy. Do have wiper switch and knob. How about $25 for the switch, knobs, and choke cable setups? Pics.... Attachment 836338 Attachment 836339 Attachment 836340 Quote:
Quote:
Quote:
|
Re: 67 SWB Part Out!
Quote:
|
Re: 67 SWB Part Out!
More to come. Some parts I have here at my house, others are still on the truck which is at my mom's farm 15 min out of my way. Just giving everyone a heads up incase you're wanting pics, or wanting a certain part that may still be on the truck. Hopefully I can get out there this weekend and take the rest of it apart.
|
Re: 67 SWB Part Out!
Raymond,
Don't bother with a pic of the exterior door handles - I'll take them either way. Check your PM's. |
| All times are GMT -4. The time now is 12:03 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com