The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   lower control arm ? (https://67-72chevytrucks.com/vboard/showthread.php?t=501288)

81ratrodc10 01-02-2012 05:52 PM

lower control arm ?
 
So im replacing all my bushings in the front control arms instead of me beatin on them i decided to take them to machine shop and have then change them for me they had them for a couple days said the lowers were a real pain i got them home and noticed the cross shaft for both lowers arnt lined up any more is ther a way to turn them in the new bushings my self or should i bring them back and have them doit thanks
Posted via Mobile Device

Pro Performance 01-02-2012 06:16 PM

Re: lower control arm ?
 
You should be able to grab them with a pair of channel locks and rotate it to the position you need to get them installed.

They just might be tight in there because of the new bushings.

81ratrodc10 01-02-2012 06:41 PM

Re: lower control arm ?
 
Ok next question does anyone have an idea how they line up i didnt make any referance marks and neither did they
Posted via Mobile Device

rwhit57 01-02-2012 07:33 PM

Re: lower control arm ?
 
Are the the nuts on them and are they tight? You should loosen them up, install them on the truck and then with the weight of the truck on them tighten them back up. I usually will bounce on it a few times to get them to sit where they should be. If you don't do it this way it tends to wad the bushing up and it will wear them out fast and usually squeak like crazy. Oh do the top ones the same way.

81ratrodc10 01-02-2012 07:47 PM

Re: lower control arm ?
 
The nuts arnt tight on either yet so ifi twist the shaft into close proximty of the old ones then lower truck onto ground then tighten upbnuts it should be ok
Posted via Mobile Device

rwhit57 01-02-2012 08:53 PM

Re: lower control arm ?
 
Yeh just get it to where you can lock the pin holes in before tightening the u bolts on the shaft, then put the arm in position to bolt to the spindle. Once it's all back together put the weight on it and then tighten your control arm bushings. Should be good.

81ratrodc10 01-02-2012 09:07 PM

Re: lower control arm ?
 
Cool thanx for the help thought it was gonna be a pain in the a$$ or be without my truck longer
Posted via Mobile Device

rwhit57 01-02-2012 10:21 PM

Re: lower control arm ?
 
No problem just take your time and make sure the shaft is on the pins good. It won't take long and it'll ride like a new one.

81ratrodc10 01-03-2012 01:01 PM

Re: lower control arm ?
 
Cool turned them today on lunch gonna start putting my truck back together tonight
Posted via Mobile Device


All times are GMT -4. The time now is 06:39 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com